Author |
Message |
borninabus Samba R&D Dept.
Joined: May 18, 2006 Posts: 4539 Location: Arizona Highways
|
Posted: Wed Feb 05, 2014 11:41 am Post subject: Identify These Push Rod Tubes |
|
|
Newest edition to the "never seen before" file.
anyone recognize them? _________________ 88 Van WBX, A/T - 13 JSW TDI 6M/T - 2012 Touareg TDI Sport |
|
Back to top |
|
|
mark tucker Samba Member
Joined: April 08, 2009 Posts: 23937 Location: SHALIMAR ,FLORIDA
|
Posted: Wed Feb 05, 2014 2:27 pm Post subject: |
|
|
oil coolers!!! possiably one off's somebody made,I had thought about finning the thicker tubes on mine.....but I have never seen over around 180 oil temps. |
|
Back to top |
|
|
rrcade Samba Member
Joined: May 29, 2010 Posts: 735 Location: WI 1962 Bug 2276
|
Posted: Wed Feb 05, 2014 2:37 pm Post subject: |
|
|
Those are Light Sabers, not as clumsy or random as a blaster |
|
Back to top |
|
|
vwracerdave Samba Member
Joined: November 11, 2004 Posts: 15309 Location: Deep in the 405
|
Posted: Wed Feb 05, 2014 3:54 pm Post subject: |
|
|
I'm guessing those are a home made project by a machinist that had nothing better to do with his time. As for cooling, not enough oil passes through the PR tubes to have any effect on lowering oil temps. _________________ 2017 Street Comp Champion - Thunder Valley Raceway Park - Noble, OK
2010 Sportsman ET Champion - Mid-America Dragway - Arkansas City, KS
1997 Sportsman ET Champion - Thunder Valley Raceway Park - Noble ,OK |
|
Back to top |
|
|
Air Cooleds Only Samba Member
Joined: October 18, 2009 Posts: 157 Location: Prescott, AZ
|
Posted: Wed Feb 05, 2014 6:18 pm Post subject: |
|
|
vwracerdave wrote: |
I'm guessing those are a home made project by a machinist that had nothing better to do with his time. As for cooling, not enough oil passes through the PR tubes to have any effect on lowering oil temps. |
PROVE IT !!! _________________ Air Cooleds Only |
|
Back to top |
|
|
Dan Ruddock Samba Member
Joined: October 25, 2012 Posts: 3594 Location: Sarasota, in my adopted state of Florida
|
Posted: Wed Feb 05, 2014 6:41 pm Post subject: |
|
|
The tube are being blasted by air coming off the cyl & heads just as hot or hotter than the oil in them. Could actually raise or maybe lower the oil temp?? Would take some carful testing to know for sure. Dan |
|
Back to top |
|
|
mark tucker Samba Member
Joined: April 08, 2009 Posts: 23937 Location: SHALIMAR ,FLORIDA
|
Posted: Wed Feb 05, 2014 6:59 pm Post subject: |
|
|
hmm not enough oil flow.....must be on motors like mine that dont fill the valvecover 3/4 full like oh somany beleave sorry dave I couldent rezist. yes they do get a good hot blast of air on portions of them depending on just what tinwork is used.probably better on a aeroplane. |
|
Back to top |
|
|
modok Samba Member
Joined: October 30, 2009 Posts: 26790 Location: Colorado Springs
|
Posted: Wed Feb 05, 2014 7:28 pm Post subject: |
|
|
oil coolers? I thought they were oil heaters |
|
Back to top |
|
|
neil68 Samba Member
Joined: March 17, 2007 Posts: 3440 Location: Calgary, Canada
|
|
Back to top |
|
|
Greezy Joe Samba Member
Joined: April 12, 2010 Posts: 1534 Location: Crawfordville, Fl
|
Posted: Thu Feb 06, 2014 2:47 pm Post subject: Re: Identify These Push Rod Tubes |
|
|
borninabus wrote: |
Newest edition to the "never seen before" file.
anyone recognize them? |
These look like Harley aftermarket PR tubes. _________________ Current:74 Ghia Coupe w/ 2276
71 Ghia Vert w/ 1835
07 GMC Truck
12 Jeep Wrangler
73 Harley FLH 93 cid
89 Harley 883 Sportster (1200)
Owned before: 58, 69 Ghia Coupes, 64 Canvas Sunroof, 68, 72, 73, & 74 Bugs, 63 Single Cab, 65 Bus, 66 & 70 Camper
" Duct tape can't fix stupid, but it'll muffle the sound". |
|
Back to top |
|
|
|