Author |
Message |
Jeff's Old Volks Home Samba Member
Joined: December 19, 2011 Posts: 819 Location: Chester Basin, Nova Scotia
|
Posted: Tue Apr 01, 2014 4:55 pm Post subject: What's missing here?DIY Splines? Decoupler? |
|
|
So today I had a few minutes to spare, and I thought I'd build up a front diff for my trusty Syncro, I'm just matching the gears to my new tranny, 5.43s... Everything was going great, had the case all cleaned up, and opened my new box of gears and... The ultimate decoupler!
Jeff _________________ www.jeffsoldvolkshome.com
2004 Jetta TDi Wagon
2002 Smyth Ute TDi
1990 Vanagon weekender Syncro AAZ
1987 Syncro Doka AAZ...soon to be TDI
2014 DL650ABS Xpedition
1986 Weekender Syncro (Under construction)
1987 Westfalia (Under construction)
1987 Syncro Single cab |
|
Back to top |
|
|
cellerdoor Samba Member
Joined: July 10, 2012 Posts: 403 Location: Fairfax Virginia
|
Posted: Tue Apr 01, 2014 5:31 pm Post subject: |
|
|
Lucy, you got some spline'in to do. _________________ 1986 Westy |
|
Back to top |
|
|
Christopher Schimke Samba Member
Joined: August 03, 2005 Posts: 5392 Location: PNW
|
Posted: Tue Apr 01, 2014 6:07 pm Post subject: |
|
|
Sing it with me!
One of these things is not like the others,
One of these things just doesn't belong,
Can you tell which thing is not like the others
By the time I finish my song?
Did you guess which thing was not like the others?
Did you guess which thing just doesn't belong?
If you guessed this one is not like the others,
Then you're absolutely...right! _________________ "Sometimes you have to build a box to think outside of." - Bruce (not Springsteen)
*Custom wheel hardware for Audi/VW, Porsche and Mercedes wheels - Urethane Suspension Bushings*
T3Technique.com or contact me at [email protected] |
|
Back to top |
|
|
insyncro Banned
Joined: March 07, 2002 Posts: 15086 Location: New York
|
Posted: Tue Apr 01, 2014 7:03 pm Post subject: |
|
|
cellerdoor wrote: |
Lucy, you got some spline'in to do. |
|
|
Back to top |
|
|
Jeff's Old Volks Home Samba Member
Joined: December 19, 2011 Posts: 819 Location: Chester Basin, Nova Scotia
|
Posted: Wed Apr 02, 2014 2:50 am Post subject: |
|
|
Maybe GoWesty will post a how to video!!!
Jeff _________________ www.jeffsoldvolkshome.com
2004 Jetta TDi Wagon
2002 Smyth Ute TDi
1990 Vanagon weekender Syncro AAZ
1987 Syncro Doka AAZ...soon to be TDI
2014 DL650ABS Xpedition
1986 Weekender Syncro (Under construction)
1987 Westfalia (Under construction)
1987 Syncro Single cab |
|
Back to top |
|
|
zeohsix Samba Member
Joined: August 31, 2012 Posts: 501 Location: United States
|
Posted: Wed Apr 02, 2014 8:46 am Post subject: |
|
|
In the finest Samba tradition, go to a local plumbing supply house buy the crappiest grade of water pipe you can find.....run the MIG welder with no shielding gas and weld a mild steel future failure to your gear steel shaft do same with input side of decoupler..... Proudly post photos of your fabulous re-engineering hack of a solid coupler and pat yourself on the back for a job well done! If you don't want to do it I'm sure there are others who are more than willing....possibly the guy who did the EJ22 conversion in my old Syncro _________________ I'm Cheap! I'll build that Syncro Westy myself and save money but, my labor is "FREE" especially if I ever go to sell it! One thing is I will know the quality of the parts and labor that went into the build and rest better when I'm actually driving said Westy down the road! |
|
Back to top |
|
|
|