Flywheel dowels

gtixpress · Posted: Thu Jul 31, 2014 10:41 am Post subject: Flywheel dowels

Does anyone know where to purchase a good set of stock-length flywheel dowels? My crank/flywheel is 8 doweled but the dowels that I have appear to be just poorly made. Some fit, some don't. And I don't want to drill anything to fit either the oversized dowels or longer-than-stock ones. The crank/flywheel has very little miles on them, so they aren't worn yet.

This is for a mild 1776cc in a Squareback and the flywheel is lightened with a counter-weighed crank and entirely balanced. If that matters. Smile

Thanks!
_________________
Joe P.
1969 VW Type 3 Squareback
2002 VW GTI 337 (Limited Edition)
2018 VW Atlas SE VR6 4Motion
2019 VW Beetle S Final Edition Convertible

Danwvw · Posted: Thu Jul 31, 2014 11:14 am Post subject:

A local machine shop should have various sizes.
_________________
1960 Beetle And 1679cc DP W-100 & Dual Zeniths!

rustybusjef · Posted: Thu Jul 31, 2014 1:25 pm Post subject:

Here , try these
http://www.cbperformance.com/ProductDetails.asp?ProductCode=1418

gtixpress · Posted: Thu Jul 31, 2014 1:59 pm Post subject:


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

Forum Index -> Performance/Engines/Transmissions		Share:
		Print View

	Forum Index -> Performance/Engines/Transmissions	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1