westcoastbullies
Samba Member
Joined: July 02, 2002
Posts: 302
Location: DIABLOS SHADOW
|
 Posted: Sun Mar 20, 2005 11:28 pm Post subject: 6 to 12 volt hazard relay? |
 |
|
I havent converted anything this late before, 1965. What do you do to the hazard relay and the highbeam/lowbeam relay, just replace with later 67 12 volt stuff or r&r with generic 12 volt blinker etc....Thanks for the heads up
_________________
WWW.WESTCOASTBULLIES.COM
TEAM AUOK 1984 SKATEBOARD CO. |
|
Kaput
Samba Member
Joined: December 12, 2002
Posts: 859
Location: Lakewood, CO
|
| Posted: Sun Mar 20, 2005 11:58 pm Post subject: |
|
|
Hi , I have a 65 that I converted to 12v last summer. I have a seperate e-flasher relay that still works on 12 volt. My turn signals went out around x-mas time but I think the e-flasher will keep working for some time , tested today, as it dosent get used much.
I would also appriciate a link for a 12 volt e-flasher relay. For now it still does it's job.
From what I have experianced, 6 volt stuff seems to work on 12 till it gets burnt out. The signal flasher lasted about 6 months being used daily. When the flasher goes I will replace it. |
|
