| Author |
Message |
wasabiVdubbin
Samba Member
Joined: December 06, 2009
Posts: 62
Location: Hawaii
|
 Posted: Tue Mar 17, 2015 11:49 am Post subject: Westfalia interior help/confusion |
 |
|
What does the missing piece here look like? Not the cabinet door but the small circle.
Where can I find this vent?
My sliding door handle does not feel or open right does anyone have advice on how the true adjustment is to be set? |
|
| Back to top |
|
 |
Bleyseng
Samba Member
Joined: July 03, 2005
Posts: 4752
Location: Seattle
|
| Posted: Tue Mar 17, 2015 7:33 pm Post subject: |
|
|
This is the pushbutton lock with cover for the seat/bed
This is the vent for the refer
_________________
70 Ghia Black convert-9/69 build date-stock w/133k 1600 SP-barn find now with a rebuilt tranny and engine
77 Westy 2.0L w/Ljet, Camper Special engine-95hp and with LSD!(sold)
76 Porsche 914 2.1L L20c, 120hp Djet (sold)
87 Syncro Westy Titan Red 2.1L 2 knob 100k miles |
|
| Back to top |
|
|
obieoberstar
Samba Member
Joined: March 07, 2002
Posts: 1126
Location: Tucson
|
| Posted: Tue Mar 17, 2015 9:19 pm Post subject: |
|
|
I used the Bentley manual to try and adjust the sliding door handle. It seems that the manual does not cover the late bay models.
The day before I lubed all pivot points, lubed the upper and lower rollers, the pivot linkage. The plastic block on the sliding door was ok with no cracks.
The door closed really well, much better than before. Minimal effort to get it to shut. Not as easy as a Vanagon, but very close. Cable adjustment really did not seem to be adjusted.
I would recommend cleaning and lubricating everything before going after the sliding door cable.
I wanted to get it perfect using the Bentley only to find that it covered sliding doors with 2 cables. |
|
| Back to top |
|
|
Tcash
Samba Member
Joined: July 20, 2011
Posts: 12844
Location: San Jose, California, USA
|
|
| Back to top |
|
|
|
