1965 just cranks and cranks when hot. Won't fire up

DeVertible · Posted: Fri May 22, 2015 8:42 am Post subject:

Sorry about the multi pixs. My hand must have stuttered does have correct lid. 1987 restoration of an original Lake Tahoe based vehicle. I have adjusted valves at .006. The charging system does seem suspect as I drive last night's with lights on and I get a faint gen light. Got trickle on the battery while away. Will re visit issue Monday

Johnous · Posted: Fri May 22, 2015 3:04 pm Post subject:

https://www.youtube.com/watch?v=eU6aVBW71Es

FYI

DeVertible · Posted: Fri May 22, 2015 9:06 pm Post subject:

Very interesting. . . Wow. Thanks, another possibility.

DeVertible · Posted: Fri May 22, 2015 9:08 pm Post subject:

Very interesting. . . Wow. Thanks, another possibility.

DeVertible · Posted: Mon May 25, 2015 5:24 pm Post subject:

Update; It is not the condenser, nor the fuel pump rod binding. I replaced the condenser and checked the actuator rod for freedom. Replaced coil with a used one and replaced the regulator with a new one which did solve the dim idiot light issue so that's good. I do not think it is vapor lock either, as it will not start with starting fluid or added gas to carburetor. I am coming to the conclusion it is simply a flooding problem. It will start using the standard 'open full throttle' to let things dry out and vaporize after sitting for thirty minutes or so. wish they made a 6 volt idle shut off. Has anyone tried to operate a 12 volt unit successfully on six volts? It just may be as good as it gets. Ever here the song; 12 Volt Man by Jimmy Buffet? I think that's me

Eric&Barb · Posted: Mon May 25, 2015 5:46 pm Post subject:

Idle shut off only helps to keep engine from running on after shutting down a hot engine. Will not stop flooding due to carb/fuel pump getting heated up.
_________________
In Stereo, Where Available!

mukluk · Posted: Mon May 25, 2015 8:29 pm Post subject:

If you're really serious about operating a 12v shutoff solenoid in your 6v car, there are 6 to 12 volt power inverters available for purchase that'll do the job, just be warned that they aren't terribly cheap.
_________________
1960 Ragtop w/Semaphores "Inga"

DeVertible · Posted: Wed May 27, 2015 6:09 pm Post subject:

FYI. . . Installed 12 volt idle cutoff after testing on 6 volt battery successfully. It operated most of the time but would stop holding occasionally and the engine would quit. Pretty simple unit . A guy could make a living rewiring the coils

DeVertible · Posted: Sat Jul 18, 2015 7:26 am Post subject: follow up to hard starting issue

Installed correct 1967 pict -1 carb, 6 volt idle cut off and correct 1966 67 vacuum advance dist. Starts first crank. Happy Guy

DeVertible · Posted: Sat Jul 18, 2015 7:27 am Post subject: follow up to hard starting issue

Installed correct 1967 pict -1 carb, 6 volt idle cut off and correct 1966 67 vacuum advance dist. Starts first crank. Happy Guy

Eric&Barb · Posted: Sat Jul 18, 2015 12:42 pm Post subject:

Most excellent!! Thanks for updating us all.
_________________
In Stereo, Where Available!


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

1965 just cranks and cranks when hot. Won't fire up
Page: Previous 1, 2

	Forum Index -> Beetle - 1958-1967	All times are Mountain Standard Time/Pacific Daylight Savings Time Page: Previous 1, 2
Page 2 of 2