Donnie strickland Samba Member
Joined: December 21, 2009 Posts: 2403 Location: Moody, AL
|
Posted: Sun Jan 10, 2016 12:56 pm Post subject: Re: Engine removal with auto tranny |
|
|
I used a couple of pieces of scrap lumber to give a little wider base, and ratchet-strapped it to the jack. The lumber was screwed together so it wouldn't move around. The wood is 22 inches on the long side, 15 inches on the short side. There was no problem with stability, and the jack has a front-to-back tilt adjustment.
I sat the oil sump on the white part, and the differential sat on the 2X8. The jack is on four casters, so it will move easily in any direction.
_________________ 71 Elm Green FI A/T Squareback |
|