Author |
Message |
outwesty Samba Member
Joined: June 06, 2006 Posts: 1074 Location: Tahoe City
|
Posted: Thu Feb 25, 2010 10:47 am Post subject: Thread pitch for transmission bolts |
|
|
Can someone tell me what the thread pitch is for the big M12 bolts that hold the engine and transmission together? Thanks |
|
Back to top |
|
|
kevtherev Samba Member
Joined: December 23, 2007 Posts: 897 Location: the 51st state
|
Posted: Thu Feb 25, 2010 12:20 pm Post subject: |
|
|
ah there's two types
coarse is 1.75 and fine is 1,1.25, 1.5
most likely it's a coarse thread into alloy |
|
Back to top |
|
|
MarkWard Samba Member
Joined: February 09, 2005 Posts: 17155 Location: Retired South Florida
|
Posted: Thu Feb 25, 2010 12:48 pm Post subject: |
|
|
It is the same thread as the 12mm diesel head bolts. I can't find the pitch anywhere for you. I think I might have a bolt laying around that I could put my pitch gauge on. I would be inclined to get new bolts from the dealer that are application specific. mark _________________ ☮️ |
|
Back to top |
|
|
tencentlife Samba Member
Joined: May 02, 2006 Posts: 10078 Location: Abiquiu, NM, USA
|
Posted: Thu Feb 25, 2010 7:49 pm Post subject: |
|
|
M10 x 1.5. _________________ Shop for unique Vanagon accessories at the Vanistan shop:
https://intrepidoverland.com/vanistan/
Please don't PM here, I will not reply.
Experience is kryptonite to doctrine. |
|
Back to top |
|
|
MarkWard Samba Member
Joined: February 09, 2005 Posts: 17155 Location: Retired South Florida
|
Posted: Fri Feb 26, 2010 7:07 am Post subject: |
|
|
tencentlife wrote: |
M10 x 1.5. |
I think he is looking for the bellhousing bolts to bolt up to a diesel block. The bulk of the bolts are 12mm. _________________ ☮️ |
|
Back to top |
|
|
tencentlife Samba Member
Joined: May 02, 2006 Posts: 10078 Location: Abiquiu, NM, USA
|
Posted: Fri Feb 26, 2010 9:09 am Post subject: |
|
|
Ahh, yes, I totally missed his sig line.
So the diesel bellhousings are drilled for M12's? Didn't know that. _________________ Shop for unique Vanagon accessories at the Vanistan shop:
https://intrepidoverland.com/vanistan/
Please don't PM here, I will not reply.
Experience is kryptonite to doctrine. |
|
Back to top |
|
|
rotaecho Samba Member
Joined: October 14, 2012 Posts: 513 Location: Nomadic Vanlifer
|
Posted: Thu Jul 07, 2016 2:22 pm Post subject: Re: Thread pitch for transmission bolts |
|
|
Looking for this info too. If anyone also has the proper VW p/n that'd rock too!
outwesty wrote: |
Can someone tell me what the thread pitch is for the big M12 bolts that hold the engine and transmission together? Thanks |
_________________ -Will
1982 Westfalia mTDI (50deg) aka Betsy Bertha
http://www.tdivanagons.com |
|
Back to top |
|
|
|