Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts  See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Vintage Speed Carb Options
Forum Index -> Vintage Speed Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Author Message
gimmesomeshelter
Samba Member


Joined: May 08, 2004
Posts: 1240
Location: San Carlos, CA
gimmesomeshelter is online now 

PostPosted: Sat Sep 27, 2014 10:04 pm    Post subject: Vintage Speed Carb Options Reply with quote

Hello-

I've always been a bit amazed at how many possible carbs we can put on our engines. I would like to suggest a sticky if we can come to some agreement regarding their attributes.
Mod Edit: Agreed - Now a Sticky.

Weber DCN
Good – Compact, documented vintage speed history
Bad –Limited support, tends to flood during hard cornering.

Image may have been reduced in size. Click image to view fullscreen.


Weber Sand cast
Good – Rare/cool
Bad – Obscenly expensive

Image may have been reduced in size. Click image to view fullscreen.


Weber IDF
Good – Widely available at reasonable prices.
Bad – May be too young (1966) to be truly vintage speed

Dellorto DRLA
Good – Very nice transition circuit
Bad – Part availability is so-so, and may be too young to be truly “vintage speed”

Image may have been reduced in size. Click image to view fullscreen.


Zenith 32NDIX
Good – Long wearing, compact, and a very nice transition circuit.
Bad – Part availability is so-so, fairly expensive to source and rebuild, manifold options are limited
Links - http://www.precisionmatters.biz/backstory-zenith-power.php
Image may have been reduced in size. Click image to view fullscreen.


Solex P40-II
Good – Cool looking, great if you like to run your engine in the 3-6K range. The best of the bunch are split shaft models (better progression circuit and independent idle/main circuits) converted to single shaft.
Bad – Part availability is so-so, throttle shaft bushings wear out, rebuilds can run 1500 USD.

Image may have been reduced in size. Click image to view fullscreen.


Solex 32 PCIB
Good – Vintage speed credibility, reproductions available at reasonable prices
Bad – 1BBL carb, originals are expensive, fit and finish of reproductions are so-so

Image may have been reduced in size. Click image to view fullscreen.


Solex 40 PCIB
Good – Vintage speed credibility (used on Porsche Pre-A 1500 Super cars)
Bad – Very rare/expensive, 1BBL carb

Cheers,

Paul
_________________
My dog's vet has all my car money (http://sagecenters.com/)


Last edited by gimmesomeshelter on Sun Sep 28, 2014 7:05 pm; edited 3 times in total
Back to top
View user's profile Send private message Gallery Classifieds Feedback
henry roberts
Samba Member


Joined: February 24, 2003
Posts: 1132
Location: australia
henry roberts is offline 

PostPosted: Sun Sep 28, 2014 2:16 am    Post subject: Reply with quote

Weber 46 IDA ex Porsche 90# race motors

Good - serious race pedigree, look good, serious flow capability

Bad - very rare, very expensive, physically large, serious flow capability, like progression modifications to help tame them for street use.

Image may have been reduced in size. Click image to view fullscreen.



Weber 48 IDA

Good - easily available, race pedigree, look good, serious flow capability

Bad - physically large, serious flow capability, like progression modifications to help tame them for street use.

Image may have been reduced in size. Click image to view fullscreen.


Solex P40-II-6 ex Fiat (as opposed to the normal -4's ex Porsche)

Good - fit IDF manifolds, half the price of Porsche carbs (may also take IDF aircleaners, but I haven't checked)

Bad - Harder to find rebuild kits for, have cable chokes, use slip fit fuel lines with a twin fitting on one side, don't take the beautiful Porsche aircleaners, look more clumsy than the Porsche style, other probs as per the Porsche variant. late 60's?

Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Last edited by henry roberts on Mon Sep 29, 2014 5:36 pm; edited 2 times in total
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
henry roberts
Samba Member


Joined: February 24, 2003
Posts: 1132
Location: australia
henry roberts is offline 

PostPosted: Sun Sep 28, 2014 5:22 am    Post subject: Reply with quote

Solex 32 PCI

Good - use the same twin carb linkage style as a 28 PCI set up, less jets than a PBIC (hopefully simpler to jet), rebuild kits available, the breakable bit (e-tube holder thingy) is the same as a 28 PCI.

Bad - uncommon, still not a direct visual swap for a 28 PCI.

at least 2 variants.

VW industrial? motor. 32 PCI 1 has VW linkage arms and the clamp base for the choke cable. no idea if it has a vacuum line port or not.

Lloyd Alexander. 32 PCI no choke cable mount. no vacuum line fitting. different linkage arms but the vw ones bolt straight on. screw fitting fuel line. mount studs fitted to carb base, spaced +/- 59mm (note: different to the 32 PBIC's measured)

jetted when it arrived to me:

vent 24mm plastic

main: 120

idle: 50

VW (pics from the classifieds)

Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Lloyd Alexander

Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


there are also Solex 34 PCI's out there.


Last edited by henry roberts on Sun Sep 28, 2014 8:23 am; edited 2 times in total
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
henry roberts
Samba Member


Joined: February 24, 2003
Posts: 1132
Location: australia
henry roberts is offline 

PostPosted: Sun Sep 28, 2014 7:40 am    Post subject: Reply with quote

french made Solex F32 PBIC variation notes

all bar the PBICc (mine missing it's throttle shaft etc) have full round throttle shafts, not thinned with flat milled areas like the 32 PCI. the shafts look to be brass.

all bar the PBICT (missing it's top) have slip on fuel lines with built in filters before the float valve. these carbs have a smaller single entry for the choke air bypass unlike the larger divided entry on carbs shown in the original post.

all have mount holes in the base spaced +/- 60mm apart.

the jetting details are to help id potential spare part sources. I wasn't game to pull the E-tubes, otherwise, if it's not listed, it either isn't marked or is missing.

F32 PBICT ex Simca P60?

big "Autostarter" choke mech with at least one extra gallery in the body near the choke.

venturi: 24mm metal.
main:120
idle: 45
starter fuel jet: Gp 50
accelerator pump no: 72
"starter" jet: 115
float valve 1.5
float weight: 5.7

Image may have been reduced in size. Click image to view fullscreen.


F32 PBICA ex peugeot 403 and others.

has 2 lines running into the carb body just above the throttle shaft. look to be water for carb heating. I think it could be cut away for cleaner looks, but it would be quite a lot of work.

2 carbs.
venturi: 23mm 1 plastic 1 metal.
main: 120
idle jet: 45
air correction: a 170 in one an 180 in the other.
starter fuel jet: Gs 105
starter air jet: 5.5
accelerator pump jet: Gp 45
accelerator pump body no: 72
acc pump spray tube: 50
float valve 1.5
float weight 5.7


Image may have been reduced in size. Click image to view fullscreen.


Solex F32 PBICc ex citroen ID 19?

this looks to be the best/easiest to fit on a VW.

Venturi: 23mm metal
main: 120
idle: 45
air correction: 180
starter fuel jet: Gs 105
starter air jet: 5.5
accelerator pump jet: Gp 45
accelerator pump body no: 72
acc spray tube marked: 50
float valve: 1.5
float weight: 5.7

sorry no pic but it looks like your normal PBIC with a cable choke attachment.

all pics pinched off the internet as the carbs I have are "as found" aka filthy.

I hope this is of some help.
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
henry roberts
Samba Member


Joined: February 24, 2003
Posts: 1132
Location: australia
henry roberts is offline 

PostPosted: Sun Oct 19, 2014 12:40 am    Post subject: Reply with quote

Weber 35, 38 & 40 DCNL

35mm fitted to some Lancia Flaminia's and competition Tatra's 603's

38 and 40mm fitted to various Maserati's

if anyone knows more about these please post.

Good: small throttle bores more suited to our engines, unless you hang out with the old Maserati/Lancia crowd you will probably never ever park next to someone else running them.

bad: rare, I can't imagine too many people that know anything about them.

35 DCNL

Image may have been reduced in size. Click image to view fullscreen.


38 DCNL

Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


pics from off the net as I have never even seeing one.
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
henry roberts
Samba Member


Joined: February 24, 2003
Posts: 1132
Location: australia
henry roberts is offline 

PostPosted: Sun Oct 19, 2014 3:31 am    Post subject: Reply with quote

Weber 36, 40, 42, 44 DCNF

the DCN's (slightly) younger brother, available in sandcast (rare/$) and diecast (readily available)

40mm seems to be the most common.

Good: far more common than DCN's, available in a variety of throttle bores, fixes for the flooding issues documented, heaps of manifold options for later dualport motors, may be able to modify stefi g's okrasa NDIX manifolds to work, awesome looking cast velocity stacks available s/h, other +'s as per the DCN

Bad: uses different main jets to IDF/IDA's, a wide variety of sub models so making a pair from singles takes care. other -'s as per the DCN

DCNF's
Image may have been reduced in size. Click image to view fullscreen.



DCNF's use a 4 bolt manifold as opposed to DCN's that use a 3 bolt.

DCN manifold.
Image may have been reduced in size. Click image to view fullscreen.


DCNF manifold
Image may have been reduced in size. Click image to view fullscreen.


a DCN/DCNF comparison picture from the gallery
Image may have been reduced in size. Click image to view fullscreen.


all pics off the net.
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
henry roberts
Samba Member


Joined: February 24, 2003
Posts: 1132
Location: australia
henry roberts is offline 

PostPosted: Sat Dec 06, 2014 6:12 am    Post subject: Reply with quote

came across some potentially useful info, parts and spares while poking around riechart's web site.

http://www.riechertmotorentechnik.de/

solex PCI/P11-4/PBIC/PCIB and zenith NDIX jets
+ new solex emulsion tube carriers!
http://www.riechertmotorentechnik.de/Vergaser/Duesen/duesen.html

linkage kits/parts fuel line hardware
http://www.riechertmotorentechnik.de/Vergaser/gasgest/verg_gasg_einzt.html

new PCI and NDIX airfilters
http://www.riechertmotorentechnik.de/Vergaser/luft/luftfilt_nassluftfilter_1.htm
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
henry roberts
Samba Member


Joined: February 24, 2003
Posts: 1132
Location: australia
henry roberts is offline 

PostPosted: Sun Dec 07, 2014 6:45 pm    Post subject: Reply with quote

an update on SOLEX P40-11-6's

they do share the air cleaner mount bolt spacing for WEBER IDF's and DELLORTO DLRA's:

67.5mm on one side and 112.5 on the other with the centrelines 62mm apart.

if the mods want to edit this into the solex P40-11-6 post that would be great.
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
Mr. Okrasa Premium Member
Original Old Speed


Joined: May 20, 2000
Posts: 521
Location: Newport Heights, So. Califas.
Mr. Okrasa is offline 

PostPosted: Sun Apr 17, 2016 10:15 pm    Post subject: Re: Vintage Speed Carb Options Reply with quote

Weber DCM / Sandcast

Used in high performance applications such as Porsche 550 Spyders. This carb was desired for the competition Denzel 1500cc cars.
I stole these for $6500. Last set I found for sale, they were $10k+

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

_________________

1950 Split Window 356 Coupe / Black / #500X
1950 Split Window 356 Coupe / Adria Blue Metallic
1951 Split Window 356 Coupe / Radium Green Metallic
1952 Split Window 356 Cabriolet / Azure Blue
1959 VW Karmann Ghia Coupe / Bamboo-Green / Denzel 1300cc / OG. owner, paint Wink
See this link: https://vimeo.com/139432553

VW www.Okrasa.com
356 www.PreA356.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger Instagram Gallery Classifieds Feedback
ponypower42
Samba Member


Joined: March 04, 2013
Posts: 2

ponypower42 is offline 

PostPosted: Tue Apr 19, 2016 7:54 am    Post subject: Re: Vintage Speed Carb Options Reply with quote

I have the exact pair, are you interested in another set.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
TomSimon
Samba Member


Joined: January 13, 2004
Posts: 577

TomSimon is offline 

PostPosted: Wed Jul 27, 2016 4:19 pm    Post subject: Re: Vintage Speed Carb Options Reply with quote

Let's not forget the infamous Fish carburetor. I have a new one in my parts stash, made specifically for the VW engine.
_________________
2-time NASA Pro Racing Champion
Back to top
View user's profile Send private message Visit poster's website Gallery Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> Vintage Speed All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2016, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB