Author |
Message |
TailTip Samba Member
Joined: July 08, 2006 Posts: 644 Location: Western Washington
|
Posted: Fri Jan 23, 2009 11:09 am Post subject: Bringing back the shine |
|
|
I see all the pics about bringing the shine back to their VW's, was wondering what people been using? Pictures would be cool IF you have them, also.
Last edited by TailTip on Sun Jan 25, 2009 10:13 am; edited 1 time in total |
|
Back to top |
|
|
Foxx Uncle Meat
Joined: August 27, 2001 Posts: 4897 Location: at the computer,.......DUH!
|
Posted: Fri Jan 23, 2009 4:21 pm Post subject: |
|
|
this will prolly be as opinionated as what motor oil to run but most will agree
Meguiars makes some good stuff with waxes and compounds and by going to your local paint and body store you can see what the pros use. talking to a few local body men might help too,. _________________ Frank
OG JHC
59 panel
Sarcasm is the body's natural defense against stupidity. i seem to use a lot. |
|
Back to top |
|
|
Ipaintem Samba Member
Joined: September 11, 2004 Posts: 522 Location: Brown Summit N.C.
|
Posted: Fri Jan 23, 2009 5:54 pm Post subject: |
|
|
If you want the ABSOLUTE BEST use Zaino. Go to their website, zainostore.com and look thru their products and choose what best suits your needs. I have tried tons of polishes and waxes. This is BY FAR the best I have ever used. Z2 pro with the ZFX hardner is awsome, the CS (clear seal) is also a great product. _________________ www.jmcautoworx.com |
|
Back to top |
|
|
TailTip Samba Member
Joined: July 08, 2006 Posts: 644 Location: Western Washington
|
Posted: Fri Jan 23, 2009 6:39 pm Post subject: |
|
|
Ipaintem wrote: |
If you want the ABSOLUTE BEST use Zaino. Go to their website, zainostore.com and look thru their products and choose what best suits your needs. I have tried tons of polishes and waxes. This is BY FAR the best I have ever used. Z2 pro with the ZFX hardner is awsome, the CS (clear seal) is also a great product. |
First I've heard of them.
Foxx...I've read a lot of good things about Meguirs, specifically M105. It's nice to hear input on people's favorites, likes, dislikes, and other opinions.
|
|
Back to top |
|
|
vpogv Samba Member
Joined: August 14, 2008 Posts: 230
|
Posted: Fri Jan 23, 2009 11:24 pm Post subject: |
|
|
Meguiars and 3m are what I have been using for years without an issue. Pick the right polish and a DA polisher and you're set. |
|
Back to top |
|
|
scottyrocks Samba Member
Joined: August 19, 2016 Posts: 2666 Location: Long Island, NY
|
Posted: Tue Mar 28, 2017 4:54 pm Post subject: Re: Bringing back the shine |
|
|
I've heard good things about Meguiar's No.7 polish. It's been around for about a hunnerd years.
Very light abrasive so it doesn't take off too much dead paint too quickly. I want to use it with a machine. Does anyone have any experience with it? |
|
Back to top |
|
|
67rustavenger Samba Member
Joined: February 24, 2015 Posts: 9772 Location: Oregon
|
Posted: Wed Mar 29, 2017 4:30 am Post subject: Re: Bringing back the shine |
|
|
scottyrocks wrote: |
I've heard good things about Meguiar's No.7 polish. It's been around for about a hunnerd years.
Very light abrasive so it doesn't take off too much dead paint too quickly. I want to use it with a machine. Does anyone have any experience with it? |
When I was 19yo. I worked at a High end detail shop in Newport Beach, Ca.
We used Meguires products including #7 polish.
With a machine. Apply the polish to the surface and spread it about. If you leave it in a puddle and hit it with the polishing pad, it will sling everywhere. Make sure to tape off any edges that may get the paint burned off while polishing the car. Also tape off the fresh air intake louvers. If you don't it will take you a very long time trying to get the spattered polish out of there.
As you polish the paint you can see/feel it removing surface oxidation. Do one quarter at a time. Wipe off the polish left over and admire the renewed surface.
Then hand rub the paint again with #7 to remove swirls caused by the buffing pad. Wipe the hand applied polish and clean every crevice of residual polish.
Final step is to apply a good quality wax over the newly polished surface. And your car will have a great shine. I can't recommend a wax as we had ours formulated exclusively for our shop.
If it was good enough for Ferrari, Rolls Royce, Porsche ect. It's good enough for a beetle.
Good Luck. _________________ I have learned over the years.
Cheap parts are gonna disappoint you.
Buy Once, Cry Once!
There's never enough time to do it right the first time. But there's always enough time to do it thrice.
GFY's Xevin and VW_Jimbo! |
|
Back to top |
|
|
scottyrocks Samba Member
Joined: August 19, 2016 Posts: 2666 Location: Long Island, NY
|
Posted: Wed Mar 29, 2017 4:47 am Post subject: Re: Bringing back the shine |
|
|
This^ is exactly the info I was looking for. Thank you.
What type of pad for the machine? Does it have a special name? If I was doing the whole thing by hand I'd be using a microfiber, I suspect. I'm not up on the newer materials. |
|
Back to top |
|
|
67rustavenger Samba Member
Joined: February 24, 2015 Posts: 9772 Location: Oregon
|
Posted: Wed Mar 29, 2017 7:38 pm Post subject: Re: Bringing back the shine |
|
|
scottyrocks wrote: |
This^ is exactly the info I was looking for. Thank you.
What type of pad for the machine? Does it have a special name? If I was doing the whole thing by hand I'd be using a microfiber, I suspect. I'm not up on the newer materials. |
Well since I'm now 57yo. I am a little fuzzy on the specifics. But the pad was a synthetic hair type pad (Shelgal I believe was the brand name). At the end of my detail career they came out with the foam pads that eliminated swirls in black paint. DON'T use the lambs wool pad for polishing other than cutting in a freshly color sanded paint job.
When you have finished polishing the car. Clean the synthetic pad with some Dawn dish soap, warm water, and a stiff brush working from the center of the pad to the outside. Just grip the pad and use full arm swings to get the water out. Once it will not release any more water from the swinging. Mount it on the polisher and give it a spin until no more water is expelled. Once dry it should be soft and supple, ready for the next time that you need to polish your paint.
Like next year.
In between polishings you can use the #7 applied by hand before you rewax your car to clean up any light oxidation that may occur and replenish the depth of the paint. Remove the #7 with a micro fiber(back in the day, we used baby diapers). Then just apply a thin coat of wax. Remove with the micro fiber cloth and stand back and enjoy the luster
Good Luck Scotty!
http://www.coastaltoolsupply.com/product/SCH-375PC...AgJY8P8HAQ _________________ I have learned over the years.
Cheap parts are gonna disappoint you.
Buy Once, Cry Once!
There's never enough time to do it right the first time. But there's always enough time to do it thrice.
GFY's Xevin and VW_Jimbo!
Last edited by 67rustavenger on Wed Mar 29, 2017 8:03 pm; edited 1 time in total |
|
Back to top |
|
|
67rustavenger Samba Member
Joined: February 24, 2015 Posts: 9772 Location: Oregon
|
Posted: Wed Mar 29, 2017 8:00 pm Post subject: Re: Bringing back the shine |
|
|
A couple of words on technique.
Don't move too fast. The #7 will not have a chance to work into the paint. But don't move too slow either, you can burn through the paint fairly quickly. Get yourself a comfortable rhythm.
For suborn oxidation, you can add a table spoon of "corn starch" to the liquid to give it a little more abrasive to work with. Just add it to the bottle and shake real well before using.
Make sure to loop the buffer cord over your shoulders and down your arm to the buffer. That way the cord is supported by your body. You don't want the cord dragging over the freshly polished surface. It will leave scratches that you have to deal with later.
Good Luck _________________ I have learned over the years.
Cheap parts are gonna disappoint you.
Buy Once, Cry Once!
There's never enough time to do it right the first time. But there's always enough time to do it thrice.
GFY's Xevin and VW_Jimbo! |
|
Back to top |
|
|
scottyrocks Samba Member
Joined: August 19, 2016 Posts: 2666 Location: Long Island, NY
|
Posted: Thu Mar 30, 2017 5:30 am Post subject: Re: Bringing back the shine |
|
|
Being 57 y.o. myself, and the recipient of a fairly recent quad bypass, I don't want to do this by hand, as I had in the past. So all the info you have presented will be invaluable.
I will post 'before and after' pictures. |
|
Back to top |
|
|
|