Author |
Message |
Solomon Grundy Samba Member
Joined: December 26, 2004 Posts: 747 Location: Silicon Valley
|
Posted: Wed Apr 05, 2017 7:17 pm Post subject: 481 Emblem 3D Printed in Nylon w/ Carbon Fiber + magnets |
|
|
For those of us with Type IV engines in our 181 we have a new 481 emblem for our beasts. I did this project before with lackluster results using a PolyJet.
Now I have a nice new MarkForged Mark Two printer. Printed in 100 micron layers.
https://markforged.com/mark-two/
So now I can use nylon with chopped carbon fiber, plus continues strands of carbon fiber inlay. Then press fit in rare earth magnets to hold firm to the body.
Blue strands are where the continues strands of carbon fiber are inlaid
_________________ "Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind."
- Dr. Seuss
VW 181 Archive: https://sites.google.com/site/jeffgilleland/vw_archive
| _______
| |_______| '73 Thing "481"
| _\_\_|_/_/_
| |O||_4_||O|
| [ ]=====[ ]
http://vwthingregistry.com
https://doublecabshaka.wordpress.com |
|
Back to top |
|
|
Hobug Samba Member
Joined: May 19, 2004 Posts: 220 Location: Bishop, GA
|
Posted: Wed Apr 05, 2017 9:42 pm Post subject: Re: 481 Emblem 3D Printed in Nylon w/ Carbon Fiber + magnets |
|
|
I want one! That looks great! Seriously, I do want one. What is the cost and how do you want to be paid? _________________ 73 Thing (Typ481)
76 Westy
69 Squareback auto
72 Super
63 Bug |
|
Back to top |
|
|
Solomon Grundy Samba Member
Joined: December 26, 2004 Posts: 747 Location: Silicon Valley
|
Posted: Thu Apr 06, 2017 7:25 am Post subject: Re: 481 Emblem 3D Printed in Nylon w/ Carbon Fiber + magnets |
|
|
Note sure yet. But I like the serious Industrial look of it. To bad it will need to get painted or it will break down over time in the sun.
Here is a picture of the first attempt using a 25 microns Polyjet with photopolymers. One picture hot off the press and one painted. But it was too flexible and warped a little.
_________________ "Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind."
- Dr. Seuss
VW 181 Archive: https://sites.google.com/site/jeffgilleland/vw_archive
| _______
| |_______| '73 Thing "481"
| _\_\_|_/_/_
| |O||_4_||O|
| [ ]=====[ ]
http://vwthingregistry.com
https://doublecabshaka.wordpress.com
Last edited by Solomon Grundy on Thu Apr 06, 2017 7:35 am; edited 1 time in total |
|
Back to top |
|
|
Hobug Samba Member
Joined: May 19, 2004 Posts: 220 Location: Bishop, GA
|
Posted: Thu Apr 06, 2017 7:35 am Post subject: Re: 481 Emblem 3D Printed in Nylon w/ Carbon Fiber + magnets |
|
|
Cool! I'll keep watching for more info. _________________ 73 Thing (Typ481)
76 Westy
69 Squareback auto
72 Super
63 Bug |
|
Back to top |
|
|
Solomon Grundy Samba Member
Joined: December 26, 2004 Posts: 747 Location: Silicon Valley
|
|
Back to top |
|
|
Solomon Grundy Samba Member
Joined: December 26, 2004 Posts: 747 Location: Silicon Valley
|
|
Back to top |
|
|
Hobug Samba Member
Joined: May 19, 2004 Posts: 220 Location: Bishop, GA
|
Posted: Tue Apr 11, 2017 10:47 am Post subject: Re: 481 Emblem 3D Printed in Nylon w/ Carbon Fiber + magnets |
|
|
Solomon Grundy wrote: |
Hobug wrote: |
Cool! I'll keep watching for more info. |
If you want one please PM me. |
PM sent! _________________ 73 Thing (Typ481)
76 Westy
69 Squareback auto
72 Super
63 Bug |
|
Back to top |
|
|
Hobug Samba Member
Joined: May 19, 2004 Posts: 220 Location: Bishop, GA
|
Posted: Tue Apr 18, 2017 6:05 am Post subject: Re: 481 Emblem 3D Printed in Nylon w/ Carbon Fiber + magnets |
|
|
Got it! It looks great! _________________ 73 Thing (Typ481)
76 Westy
69 Squareback auto
72 Super
63 Bug |
|
Back to top |
|
|
|