Author |
Message |
ernieballbass Samba Member
Joined: June 14, 2006 Posts: 191 Location: Orlando, Fl
|
Posted: Tue Aug 25, 2015 4:58 pm Post subject: |
|
|
GI Joe wrote: |
That's one heck of a distributor! What is that thing?? Nits got some serious guts to it!
My guess on the wire you pictured, and it's just a guess, is something to do with the diagnostics.... Perhaps an RPM sender for the diagnostic plug??
But, what do I know! I'm sure Gary, Alcupolco, or Ron will set me straight! Lol
Great looking work on your paint! Makes me wanna yank my starter and clean it up! Lol |
The distributer is off of a Suzuki samari 1.0L. My grandfather gave it to me for Christmas a long time ago. I made it work, but I may end up switching to a 019 eventually. _________________ What I lack in brains, I make up for with good intentions. |
|
Back to top |
|
|
ernieballbass Samba Member
Joined: June 14, 2006 Posts: 191 Location: Orlando, Fl
|
Posted: Mon Sep 28, 2015 1:25 pm Post subject: |
|
|
Update
Engine was running okay, but i wanted to freshen up the cosmetics. here is what i started with...
i got inspired by that RoadKill show on youtube and made a To-Do List
teardown
_________________ What I lack in brains, I make up for with good intentions. |
|
Back to top |
|
|
ernieballbass Samba Member
Joined: June 14, 2006 Posts: 191 Location: Orlando, Fl
|
Posted: Mon Sep 28, 2015 1:40 pm Post subject: |
|
|
i got distracted and bought a 1988 VW Fox. this is the newest car i have ever bought lol. for the first time in 4 years, my daily driver has air conditioning and a radio
after a couple of crazy weeks, i managed to paint/assemble everything. i used the Rustoleum Engine Enamel for the black parts and Rustoleum Hammered-look for the rest.
an extra sump was added along with new pushrod tubes and oil filter/pump assembly.
i still need to button up a couple of things (throttle cable, coil, etc). before anyone freaks out, i left the contact patch on the alternator unpainted. i even left some bare metal on the gen stand where it bolts to the case that way i get a good ground.
fun times _________________ What I lack in brains, I make up for with good intentions. |
|
Back to top |
|
|
liken127 Samba Member
Joined: June 27, 2013 Posts: 102 Location: Upland Ca.
|
Posted: Mon Sep 28, 2015 7:22 pm Post subject: |
|
|
looks great! can't wait to see the final set up! I was told the wire
on the back of the case, at flywheel was for the fuel injection system?
not sure how many Things came with this?? I like what gijoe said!
Good luck with the car. |
|
Back to top |
|
|
ernieballbass Samba Member
Joined: June 14, 2006 Posts: 191 Location: Orlando, Fl
|
Posted: Mon Apr 24, 2017 6:11 pm Post subject: Re: Official Ernieballbass Build Thread |
|
|
This project isn't dead lol. It's been awhile since I've done a project update. I've been super distracted by other VW and non-VW projects. Between flipping a Rabbit and an S10, I've gotten more $$$ for the Thing budget.
Here she is after media blasting...and yes, it's as nasty as it looks lol
I got her home and went to town with Master Series Metal Prep. Obvious I need to shoot some epoxy primer sooner rather than later.
Getting her off the trailer by myself was sketchy
finally on the ground on casters!
ya i need to clean the garage...
Patience is the name of the game. I know it's taking forever compared to most guys, but I'm doing what I can when I can _________________ What I lack in brains, I make up for with good intentions. |
|
Back to top |
|
|
Das Ding Samba Member
Joined: April 25, 2008 Posts: 73 Location: Shenandoah Valley
|
Posted: Tue Apr 25, 2017 7:53 am Post subject: Re: Official Ernieballbass Build Thread |
|
|
Your project reminds me of mine except your doing a better job!
Here is a picture of my car body upside down with wheel dollies attached to the windshield frame mounts, and to the body near the rear shelf area.
I bent a heavy pieces of aluminum to make angle shapes to mount the rear wheels.
I was able to move the car around to make the rust repairs without killing my back.
I might have stressed the car body a little, however it went back on the pan with no issues.
Keep up the good work!
Zane |
|
Back to top |
|
|
ernieballbass Samba Member
Joined: June 14, 2006 Posts: 191 Location: Orlando, Fl
|
Posted: Thu Apr 27, 2017 7:13 am Post subject: Re: Official Ernieballbass Build Thread |
|
|
Das Ding wrote: |
Your project reminds me of mine except your doing a better job!
Here is a picture of my car body upside down with wheel dollies attached to the windshield frame mounts, and to the body near the rear shelf area.
I bent a heavy pieces of aluminum to make angle shapes to mount the rear wheels.
I was able to move the car around to make the rust repairs without killing my back.
I might have stressed the car body a little, however it went back on the pan with no issues.
Keep up the good work!
Zane |
thanks man!
how did you flip the body over like that? i may have to flip mine to work on the rust. _________________ What I lack in brains, I make up for with good intentions. |
|
Back to top |
|
|
Das Ding Samba Member
Joined: April 25, 2008 Posts: 73 Location: Shenandoah Valley
|
Posted: Thu May 18, 2017 5:42 am Post subject: Re: Official Ernieballbass Build Thread |
|
|
I am sorry for the late reply!
After I put the the wheels on the body, and it was free of the pan all the way
around myself and three others carefully flipped the car upside down.
The car body is not that heavy.
We had a family get together at our house and I picked three of the strongest men!
Once it was upside down on my garage floor it was easy for me to roll around by myself. |
|
Back to top |
|
|
ernieballbass Samba Member
Joined: June 14, 2006 Posts: 191 Location: Orlando, Fl
|
Posted: Mon May 13, 2019 5:09 pm Post subject: Re: Official Ernieballbass Build Thread |
|
|
man, I keep on getting distracted. so i got involved with watercooled vws, started racing at my local oval trck with a beat up saturn, and had baby [well my wife did...you get it...]
On top of that, i relocated my family to the beautiful state of New York _________________ What I lack in brains, I make up for with good intentions. |
|
Back to top |
|
|
ernieballbass Samba Member
Joined: June 14, 2006 Posts: 191 Location: Orlando, Fl
|
Posted: Mon May 13, 2019 5:14 pm Post subject: Re: Official Ernieballbass Build Thread |
|
|
But after a local shop did the metal work that I just didnt have time for, I brought the thing up with us!!!! the move took two trips...one with house stuff, and one dedicated to the thing
_________________ What I lack in brains, I make up for with good intentions. |
|
Back to top |
|
|
ernieballbass Samba Member
Joined: June 14, 2006 Posts: 191 Location: Orlando, Fl
|
Posted: Mon May 13, 2019 5:25 pm Post subject: Re: Official Ernieballbass Build Thread |
|
|
engine out for a high performance rebuild (rather than just using the old parts i put back in).
engine in the new mancave
and the best part, my baby girl is already helping...kinda
_________________ What I lack in brains, I make up for with good intentions. |
|
Back to top |
|
|
ernieballbass Samba Member
Joined: June 14, 2006 Posts: 191 Location: Orlando, Fl
|
Posted: Mon May 13, 2019 5:30 pm Post subject: Re: Official Ernieballbass Build Thread |
|
|
mocking up some used seats from a 1995 Trans Am (I may or not be building another racing car out of the TA...)
obviously, they need to be recovered. And I need to come up with some brackets to mount the seats higher off the floor.
Sorry about the long awaited update. but hey, it's getting done little by little. _________________ What I lack in brains, I make up for with good intentions. |
|
Back to top |
|
|
ernieballbass Samba Member
Joined: June 14, 2006 Posts: 191 Location: Orlando, Fl
|
|
Back to top |
|
|
62CdnNotch Samba Member
Joined: December 02, 2004 Posts: 86 Location: Ontario Canada
|
Posted: Mon Sep 16, 2019 9:48 pm Post subject: Re: Official Ernieballbass Build Thread |
|
|
Keep up the great work!! _________________ 1962 Type 3 Notchback
1965 Euro Beetle
1966 Beetle
1972 Westfalia (sold)
1974 Thing |
|
Back to top |
|
|
vwwestyman Samba Member
Joined: April 24, 2004 Posts: 5688 Location: Manhattan, Kansas, USA
|
|
Back to top |
|
|
ernieballbass Samba Member
Joined: June 14, 2006 Posts: 191 Location: Orlando, Fl
|
Posted: Tue Sep 17, 2019 2:04 pm Post subject: Re: Official Ernieballbass Build Thread |
|
|
that's not a bad idea. photobucket has been asking me for money...super annoying lol _________________ What I lack in brains, I make up for with good intentions. |
|
Back to top |
|
|
|