Author |
Message |
GHIA Samba Member
Joined: August 27, 2005 Posts: 345 Location: FRANCE
|
Posted: Sun Jul 16, 2017 1:51 am Post subject: The different kit OKRASA |
|
|
Does anyone know all the kit built by OKRASA?
I know there were the following models, But there were other kit?
- TS30 for 36HP
- TSv1200 for VW1200. 36HP or 40HP ???
- TSV1300/30 for 36HP
- TS34 for 40HP
- TSV1300/34 for 40HP
- TS40 for VW1300
-- TS1500 for VW1500
-- TSV1600 for VW1600
- TSV1600HS for VW 1302 and VW1303
- TV1700 for VW1500, VW1500S, VW 1600L and VW1600TL
- TSV1700 for VW1500, VW1500S, VW 1600L and VW1600TL
- TSV1800 for VW1500, VW1500S, VW 1600L and VW1600TL
- TSV1800H for VW1303 convertible
- TSV2000 HS l for VW1302 and VW1303 |
|
Back to top |
|
|
GHIA Samba Member
Joined: August 27, 2005 Posts: 345 Location: FRANCE
|
Posted: Tue Jul 18, 2017 9:36 am Post subject: Re: The different kit OKRASA |
|
|
I made corrections. Do you know of any other kit?
- TS30 for 36HP
- TSv1200 for VW1200. 36HP and 40HP ???
- TSV1300/30 for 36HP
- TS34 for 40HP
- TSV1300/34 for 40HP
- TS40 for VW1300
- TS1500 for VW1500
- TSV1600 for VW1600
- TSV1600HS1 or TSV1600HS2 for VW 1302 and VW1303
- TV1700 for VW1500, VW1500S, VW 1600L and VW1600TL
- TSV1700 for VW1500, VW1500S, VW 1600L and VW1600TL
- TSV1800 for VW1500, VW1500S, VW 1600L and VW1600TL
- TSV1800H for VW1303 convertible
- TSV2000 HS1 for VW1302 and VW1303
Person has additional info ? |
|
Back to top |
|
|
Bulli Klinik Samba Member
Joined: January 16, 2005 Posts: 2079 Location: Bulli Klinik, Colorado Springs
|
Posted: Wed Jul 19, 2017 8:14 am Post subject: Re: The different kit OKRASA |
|
|
I'm not sure if mine has been identified. Any help would be appreciated.
_________________ I've never met a Bus I didn't like.
Mike K
Bulli Klinik
Colorado Springs |
|
Back to top |
|
|
Joshua B Samba Member
Joined: January 03, 2004 Posts: 273 Location: Colorado
|
Posted: Thu Jul 20, 2017 6:22 pm Post subject: Re: The different kit OKRASA |
|
|
I like the linkage for the Zeniths. Do you have any more pictures of it? |
|
Back to top |
|
|
GHIA Samba Member
Joined: August 27, 2005 Posts: 345 Location: FRANCE
|
Posted: Fri Jul 21, 2017 10:58 am Post subject: Re: The different kit OKRASA |
|
|
Can you take more pictures (intake manifold, linkage, carbs, etc....)? |
|
Back to top |
|
|
Bulli Klinik Samba Member
Joined: January 16, 2005 Posts: 2079 Location: Bulli Klinik, Colorado Springs
|
Posted: Sat Jul 22, 2017 7:41 am Post subject: Re: The different kit OKRASA |
|
|
From what I understand, the original owner purchased the car and immediately took it to Oettinger where the modifications were done. He said it was faster than the Porsches on the Autobahn. The car is a 66. I don't think the motor has been out in decades.
_________________ I've never met a Bus I didn't like.
Mike K
Bulli Klinik
Colorado Springs |
|
Back to top |
|
|
Bulli Klinik Samba Member
Joined: January 16, 2005 Posts: 2079 Location: Bulli Klinik, Colorado Springs
|
Posted: Sat Jul 22, 2017 7:49 am Post subject: Re: The different kit OKRASA |
|
|
Current plan is to install this American style, vintage speed motor in it while the Okrasa gets restored.
_________________ I've never met a Bus I didn't like.
Mike K
Bulli Klinik
Colorado Springs |
|
Back to top |
|
|
GHIA Samba Member
Joined: August 27, 2005 Posts: 345 Location: FRANCE
|
Posted: Sat Jul 22, 2017 8:39 am Post subject: Re: The different kit OKRASA |
|
|
The carbs seem to be 32NDIX.
The heads are dual port or single port ?
The intake manifold seen to be single port |
|
Back to top |
|
|
Bulli Klinik Samba Member
Joined: January 16, 2005 Posts: 2079 Location: Bulli Klinik, Colorado Springs
|
Posted: Sat Jul 22, 2017 8:43 am Post subject: Re: The different kit OKRASA |
|
|
GHIA wrote: |
The carbs seem to be 32NDIX.
The heads are dual port or single port ?
The intake manifold seen to be single port |
Okrasa heads, dual port. Steel manifolds. _________________ I've never met a Bus I didn't like.
Mike K
Bulli Klinik
Colorado Springs |
|
Back to top |
|
|
GHIA Samba Member
Joined: August 27, 2005 Posts: 345 Location: FRANCE
|
Posted: Sat Jul 22, 2017 8:57 am Post subject: Re: The different kit OKRASA |
|
|
I don't know Okrasa or Oettinger kit with carbs 32NDIX
The attachment of the intake manifold to the cylinder head is done with 2 or 3 fixings ? |
|
Back to top |
|
|
Bulli Klinik Samba Member
Joined: January 16, 2005 Posts: 2079 Location: Bulli Klinik, Colorado Springs
|
Posted: Sat Jul 22, 2017 9:06 am Post subject: Re: The different kit OKRASA |
|
|
That's what makes it unusual! I've had other experts tell me the same.
Three studs as per Okrasa. _________________ I've never met a Bus I didn't like.
Mike K
Bulli Klinik
Colorado Springs |
|
Back to top |
|
|
Bulli Klinik Samba Member
Joined: January 16, 2005 Posts: 2079 Location: Bulli Klinik, Colorado Springs
|
|
Back to top |
|
|
GHIA Samba Member
Joined: August 27, 2005 Posts: 345 Location: FRANCE
|
Posted: Sat Jul 22, 2017 10:51 am Post subject: Re: The different kit OKRASA |
|
|
This kit looks a bit like the Sauer (apart from the intake manifold)
|
|
Back to top |
|
|
EverettB Administrator
Joined: April 11, 2000 Posts: 69824 Location: Phoenix Metro
|
|
Back to top |
|
|
GHIA Samba Member
Joined: August 27, 2005 Posts: 345 Location: FRANCE
|
Posted: Sun Jul 23, 2017 2:37 am Post subject: Re: The different kit OKRASA |
|
|
I don't know. Crankcase ventilation??????
On this enlarged photo there are 3
|
|
Back to top |
|
|
56samba Samba Member
Joined: June 25, 2015 Posts: 262 Location: Germany
|
Posted: Mon Jul 24, 2017 7:41 am Post subject: Re: The different kit OKRASA |
|
|
Cool topic you started here, Cyril!!!
I also like the Knecht air filters on the '66 bug. Never seen the tube port on the top on these air cleaners, must be very rare |
|
Back to top |
|
|
GHIA Samba Member
Joined: August 27, 2005 Posts: 345 Location: FRANCE
|
Posted: Mon Jul 24, 2017 10:38 am Post subject: Re: The different kit OKRASA |
|
|
GHIA wrote: |
I don't know. Crankcase ventilation??????
On this enlarged photo there are 3 |
I made a mistake I see 4 on the picture.
56samba wrote: |
I also like the Knecht air filters on the '66 bug. Never seen the tube port on the top on these air cleaners, must be very rare |
Hi Jan.
Can you help me to complete the list of different kit produced by Oettinger / Okrasa. |
|
Back to top |
|
|
Check0r0 Samba Member
Joined: May 12, 2013 Posts: 4 Location: Germany
|
Posted: Tue Aug 01, 2017 9:15 am Post subject: Re: The different kit OKRASA |
|
|
- TSV2000 HS for VW1302 and VW1303 (with Solex 40PDSIT carburetors)
- TSV2000 HS l for VW1302 and VW1303 (with Zenith fuel injection)
Here's a photo of my Oettinger TSV2000 HS engine in a 1303 Cabby:
_________________ Garbus 4 ever! |
|
Back to top |
|
|
GHIA Samba Member
Joined: August 27, 2005 Posts: 345 Location: FRANCE
|
Posted: Mon Aug 07, 2017 6:24 am Post subject: Re: The different kit OKRASA |
|
|
Do you have the size of the various jet carbs 40PDIST ? |
|
Back to top |
|
|
JeeWee Samba Member
Joined: February 05, 2011 Posts: 120 Location: Garijp, the Netherlands
|
Posted: Fri Aug 11, 2017 9:35 am Post subject: Re: The different kit OKRASA |
|
|
This year on Hessisch Oldendorf I've seen a guy selling okrasa manifolds for zeniths, hè Saif thee were Original from that period. I know Steffi g makes them as well but it were not those. |
|
Back to top |
|
|
|