Author |
Message |
Bunky67 Samba Member
Joined: July 05, 2012 Posts: 142 Location: SW Michigan
|
Posted: Mon Aug 21, 2017 5:42 pm Post subject: Spindle mount to wide five hub? |
|
|
Does someone make a just a hub to mount a wide five wheel on a ball joint spindle without brakes ? |
|
Back to top |
|
|
Dale M. Samba Member
Joined: April 12, 2006 Posts: 20379 Location: Just a tiny bit west of Yosemite Valley
|
Posted: Mon Aug 21, 2017 6:44 pm Post subject: Re: Spindle mount to wide five hub? |
|
|
Early IRS has wide five hubs.....
In the dim times when we wanted to have the equivalent of spindle mounts (with lugs) we just used standard brake drum and cut brake band off....
Dale _________________ “Fear The Government That Wants To Take Your Guns" - Thomas Jefferson.
"Kellison Sand Piper Roadster" For Street & Show.
"Joe Pody Sandrover" Buggy with 2180 for Autocross (Sold)
============================================================
All suggestions and advice are purely my own opinion. You are free to ignore them if you wish ... |
|
Back to top |
|
|
SamT Samba Member
Joined: April 17, 2009 Posts: 1761 Location: Rule, Tx
|
Posted: Mon Aug 21, 2017 7:39 pm Post subject: Re: Spindle mount to wide five hub? |
|
|
Dale M. wrote: |
Early IRS has wide five hubs.....
In the dim times when we wanted to have the equivalent of spindle mounts (with lugs) we just used standard brake drum and cut brake band off....
Dale |
i belive those hubs are 66, 67 models. Wide 5 drums that go on ball joint spindles. _________________ Rides:
300HP 900lb turbo VW rail 18/15 travel
Never ending jeep/rzr hybrid build!
http://www.thesamba.com/vw/forum/viewtopic.php?t=546712 |
|
Back to top |
|
|
Bunky67 Samba Member
Joined: July 05, 2012 Posts: 142 Location: SW Michigan
|
Posted: Tue Aug 22, 2017 1:26 am Post subject: Re: Spindle mount to wide five hub? |
|
|
Ok Thanks
Yes the 66-67 drums would work on the ball joint spindles. .
I will just use those drums , I thought maybe someone had made a hub to.do this. |
|
Back to top |
|
|
Rossy Samba Member
Joined: July 06, 2015 Posts: 19 Location: Greenville, SC
|
Posted: Tue Aug 22, 2017 7:06 am Post subject: Re: Spindle mount to wide five hub? |
|
|
This is something I searched all over for with no luck...ended up finding a pair of drums like mentioned above. |
|
Back to top |
|
|
|