Author |
Message |
Steve M. Samba Member
Joined: July 30, 2013 Posts: 6829 Location: Fort Lauderdale, Fl.
|
Posted: Mon Nov 13, 2017 4:14 pm Post subject: Reimo T3 elevated bench/ bed - How high is it? |
|
|
Okay, finally getting around to installing my Reimo cabinets.
I did not buy the elevated bed so the rear closet sits on top of the bed and now I need to make a sub-frame to sit the closet on to clear the engine hatch and match the forward closet.
I need the height dimension of the elevated bed that goes over the engine hatch. Does anyone know what the height is?
Thanks in advance. _________________ This free advice is worth exactly what you paid for it.
There are seven days in a week. Someday is not one of them. |
|
Back to top |
|
|
syncroserge Samba Member
Joined: November 26, 2005 Posts: 553 Location: Okotos, Alberta, Canada
|
Posted: Mon Nov 13, 2017 4:34 pm Post subject: Re: Reimo elevated bed - How high is it? |
|
|
I have 2 friends with Reimo beds. They are at different height.
One van is here so I went out and measured it at 5.5" above engine lid.
The other is in the Yukon and he is waiting for back surgery..might be harder to get an exact number..
but from memory I'd say 12 to 15 inches. hth |
|
Back to top |
|
|
Steve M. Samba Member
Joined: July 30, 2013 Posts: 6829 Location: Fort Lauderdale, Fl.
|
Posted: Mon Nov 13, 2017 4:38 pm Post subject: Re: Reimo T3 elevated bench/ bed - How high is it? |
|
|
Thank you for that quick answer.
I think I might be able to get the dimension from the forward closet, but that closet kit is buried under a ton of stuff! _________________ This free advice is worth exactly what you paid for it.
There are seven days in a week. Someday is not one of them. |
|
Back to top |
|
|
Gruppe B Samba Member
Joined: January 16, 2007 Posts: 1331
|
Posted: Mon Nov 13, 2017 8:31 pm Post subject: Re: Reimo T3 elevated bench/ bed - How high is it? |
|
|
Iirc. Reimo uses simply Baywindow hinges on the lower model and Busdepot sells these hinges new.
LuVWagon's incredible Syncro 16
|
|
Back to top |
|
|
Steve M. Samba Member
Joined: July 30, 2013 Posts: 6829 Location: Fort Lauderdale, Fl.
|
Posted: Mon Nov 13, 2017 9:36 pm Post subject: Re: Reimo T3 elevated bench/ bed - How high is it? |
|
|
Gruppe B wrote: |
Iirc. Reimo uses simply Baywindow hinges on the lower model and Busdepot sells these hinges new.
|
Thanks for the picture! It is helpful to see the layout of how they did it.
I'm not going to use the elevated bed as I want more space above me then the elevated bed gives.
I pulled out the forward closet from under the ton of stuff it was surrounded by. The forward closets dependent on how your floor is installed so that sets the height of the closets.
So I will have to put my floor back in tomorrow to measure the level. _________________ This free advice is worth exactly what you paid for it.
There are seven days in a week. Someday is not one of them. |
|
Back to top |
|
|
Buss Marius Samba Member
Joined: February 29, 2012 Posts: 98 Location: Oslo, Norway
|
Posted: Wed Nov 15, 2017 3:34 pm Post subject: Re: Reimo T3 elevated bench/ bed - How high is it? |
|
|
If i remember correctly it is 16cm difference. _________________ 87 75hp VW LT 28 Karmann LT L, 90 T3 Syncro 75hp AAZ Reimo Camper. 00 T4 102hp TDI Caravelle bus. |
|
Back to top |
|
|
macjack Samba Member
Joined: February 26, 2004 Posts: 357 Location: Colorado
|
Posted: Wed Nov 15, 2017 10:48 pm Post subject: Re: Reimo T3 elevated bench/ bed - How high is it? |
|
|
Björn has the hinges for less $ than bus depot, even with tons of shipping costs from Canada.
https://vanagonwestfaliaparts.com/collections/led-lighting/products/reimo-lifting-bed-hinge
I just ordered a set for my raised deck lid. Looking forward to a simpler bed set up than I currently have. They are in transit so I don’t have measurements yet.
-macjack _________________ 87 TDI Syncro Westy
81 Westy (sold)
80 Rabbit Wolfsburg (rolled)
Bike as primary transportation |
|
Back to top |
|
|
Steve M. Samba Member
Joined: July 30, 2013 Posts: 6829 Location: Fort Lauderdale, Fl.
|
Posted: Thu Nov 16, 2017 6:53 am Post subject: Re: Reimo T3 elevated bench/ bed - How high is it? |
|
|
The floor in the Vanagon dictates how high the closets will be above the engine deck so now that that is back in I can figure out the height above the deck.
Just measuring now it looks to be 6-13/16" or 17.4cm.
That will mean a good size drawer under the rear closet! _________________ This free advice is worth exactly what you paid for it.
There are seven days in a week. Someday is not one of them. |
|
Back to top |
|
|
Steve M. Samba Member
Joined: July 30, 2013 Posts: 6829 Location: Fort Lauderdale, Fl.
|
Posted: Wed Nov 22, 2017 6:18 pm Post subject: Re: Reimo T3 elevated bench/ bed - How high is it? |
|
|
Gruppe B wrote: |
Iirc. Reimo uses simply Baywindow hinges on the lower model and Busdepot sells these hinges new.
LuVWagon's incredible Syncro 16
|
I was curious what the "Fill Cap" is at the lower right side of the Reimo frame? _________________ This free advice is worth exactly what you paid for it.
There are seven days in a week. Someday is not one of them. |
|
Back to top |
|
|
Betty's Felix Samba Member
Joined: February 25, 2022 Posts: 2 Location: OR
|
Posted: Tue Mar 08, 2022 6:39 pm Post subject: Re: Reimo T3 elevated bench/ bed - How high is it? |
|
|
Doe's anyone have pictures of the Reimo hinges installed? |
|
Back to top |
|
|
|