Author |
Message |
surfbus23 Samba Member
Joined: July 21, 2016 Posts: 383
|
Posted: Sat Nov 25, 2017 11:22 pm Post subject: Fuel Vapor Hose Replacement |
|
|
Was curious if the fuel vapor hose system on an FI engine require FI rated hose or if I can use the carb rated Gates Barricade here?
Thanks! |
|
Back to top |
|
|
SGKent Samba Member
Joined: October 30, 2007 Posts: 41031 Location: Citrus Heights CA (Near Sacramento)
|
Posted: Sat Nov 25, 2017 11:47 pm Post subject: Re: Fuel Vapor Hose Replacement |
|
|
vapor hose is whatever will fit that is fuel rated. Vapor hose is under no pressure. _________________ “Most people don’t know what they’re doing, and a lot of them are really good at it.” - George Carlin |
|
Back to top |
|
|
Wildthings Samba Member
Joined: March 13, 2005 Posts: 50352
|
Posted: Sat Nov 25, 2017 11:52 pm Post subject: Re: Fuel Vapor Hose Replacement |
|
|
Running a higher quality hose can mean a hose that lasts longer. I just try to make a judgment call on each particular hose as I replace it. |
|
Back to top |
|
|
surfbus23 Samba Member
Joined: July 21, 2016 Posts: 383
|
Posted: Sun Nov 26, 2017 12:46 am Post subject: Re: Fuel Vapor Hose Replacement |
|
|
SGKent wrote: |
vapor hose is whatever will fit that is fuel rated. Vapor hose is under no pressure. |
Sweet. This is what I was thinking, but just wanted to confirm.
Will definitely be running a quality hose. Not interested in having redos. |
|
Back to top |
|
|
raygreenwood Samba Member
Joined: November 24, 2008 Posts: 21520 Location: Oklahoma City
|
Posted: Sun Nov 26, 2017 7:37 am Post subject: Re: Fuel Vapor Hose Replacement |
|
|
surfbus23 wrote: |
SGKent wrote: |
vapor hose is whatever will fit that is fuel rated. Vapor hose is under no pressure. |
Sweet. This is what I was thinking, but just wanted to confirm.
Will definitely be running a quality hose. Not interested in having redos. |
And if you really want to translate what SGKent correvtly stated to a rubber type for shopping....it will be a low pressure fluoroelastomer lined hose like Viton (which is a brand). Other FE rubber types that are not DuPont brand call themselves FKM or FPM which are the same thing. The FPM is just the ISO designation.
Ray |
|
Back to top |
|
|
|