Author |
Message |
rrcade Samba Member
Joined: May 29, 2010 Posts: 735 Location: WI 1962 Bug 2276
|
Posted: Mon Mar 09, 2015 9:06 pm Post subject: M&H Front Runner questions |
|
|
I have some 3.5" Erco rims and I'm wondering which front runner size to get.
I've seen both 3.5/22.0-15 and 3.6/24.0-15 M&H pop up for sale on TheSamba and I'm not sure which is best for my Bug street/strip w/2 1/2 drop spindles. I assume the 22s are the most common run by everyone for more clearance.
Also what are the advantages of a true front runner over a skinny radial on the strip? |
|
Back to top |
|
|
fabricator john Samba Member
Joined: October 09, 2009 Posts: 510 Location: manassas va. now Venice Fl.
|
Posted: Thu Mar 12, 2015 12:59 pm Post subject: |
|
|
true front runners are really really light weight as they are a drag only race tire we ran the 22.5 m&h on a pro street sandrail for several years without incodent but you could easily curl the front end car weight was 830lbs wet ,im not sure about running them on a street driven sedan you could roll one off the rim in a hard corner because they are pretty much treaded innertubes ....
fabricator john |
|
Back to top |
|
|
rrcade Samba Member
Joined: May 29, 2010 Posts: 735 Location: WI 1962 Bug 2276
|
Posted: Thu Mar 12, 2015 4:53 pm Post subject: |
|
|
probably safer to run Tubes hey? |
|
Back to top |
|
|
fabricator john Samba Member
Joined: October 09, 2009 Posts: 510 Location: manassas va. now Venice Fl.
|
Posted: Thu Mar 12, 2015 9:23 pm Post subject: |
|
|
im say "not recomended for street use "
fabricator john |
|
Back to top |
|
|
slalombuggy Samba Member
Joined: July 17, 2010 Posts: 9147 Location: Canada
|
Posted: Tue Mar 17, 2015 8:39 pm Post subject: |
|
|
DO NOT run front runners on the street. They are not heavy enough and will wear out quickly. They are also not a tire that likes to turn. They are meant to go in a straight line, period. I drove with mine on for a day testing my car on the freeway. They were downright scary if I tried to turn at any kind of speed. When properly inflated they have a VERY narrow contact patch.
brad |
|
Back to top |
|
|
TyeDyeBug Samba Member
Joined: February 27, 2006 Posts: 236 Location: Coos Bay
|
Posted: Tue Mar 17, 2015 9:48 pm Post subject: |
|
|
Front runners are a bias ply tire and shouldn't be ran with radial tires on the rear, it makes for some sketchy handling.
John |
|
Back to top |
|
|
rrcade Samba Member
Joined: May 29, 2010 Posts: 735 Location: WI 1962 Bug 2276
|
Posted: Tue Dec 05, 2017 9:29 pm Post subject: |
|
|
TyeDyeBug wrote: |
Front runners are a bias ply tire and shouldn't be ran with radial tires on the rear, it makes for some sketchy handling.
John |
I know old post but I always hear people say not to mix bias and radial, why exactly ? _________________ CHEAP - FAST - RELIABLE
You can only pick two of the above. |
|
Back to top |
|
|
ALB Samba Member
Joined: August 05, 2008 Posts: 3483 Location: beautiful suburban Wet Coast of Canada
|
Posted: Sun Dec 10, 2017 1:26 pm Post subject: |
|
|
rrcade wrote: |
TyeDyeBug wrote: |
Front runners are a bias ply tire and shouldn't be ran with radial tires on the rear, it makes for some sketchy handling.
John |
I know old post but I always hear people say not to mix bias and radial, why exactly ? |
I don't know the particulars, but each type of tire has different handling characteristics that don't play well together (and can be downright dangerous) if you try to mix them on the same car. I started driving in the early/mid '70's and it's something that's always been said. This is one of the few things I've never really questioned. I believe each type reacts differently as the weight transfers from one sidewall to the other. Al _________________ On a lifelong mission to prove (much to my wife's dismay) that Immaturity is Forever!! |
|
Back to top |
|
|
slalombuggy Samba Member
Joined: July 17, 2010 Posts: 9147 Location: Canada
|
Posted: Tue Dec 12, 2017 2:51 pm Post subject: Re: M&H Front Runner questions |
|
|
The belts in the carcass of the tire are aligned in different patters, so as the tire rolls down the road, they distort in different directions, a radial distorts more side to side where as the bias ply bulges front to back so as you go down the road, you have one axle (very slightly) squiggling side to side and one end tracking straight, if you have matched tires at both ends you won't notice the different roll of the tires it is so slight. with a radial/bias mismatch, the car start to act like a trailer with not enough tongue weight and starts whipping the radial tire end of the vehicle. Radial tires also roll over more in corners.
I drove a car and trailer 1 mile with mismatched tires before I stopped and let the owner drive. Appearantly he had the right rhythm on the steering wheel to keep it straight but I just about went in the ditch. We got to the race in Calgary, unloaded the car and drove to a tire shop to get to radial scrubs put on. It was frightening to drive.
brad |
|
Back to top |
|
|
|