Looking for a wire harness For a 71 type 3 squareback dual carb

[jeremy1973]

Hi. Searching the web and no luck. Any ideas. Dual carb 71 type 3 squareback

[BSQUARE]

Just about everything you'll need is in the stock wiring harness - oil pressure light switch wire, the two generator wires, and the black wire to the coil.

You can make your own wiring for the chokes and idle cutoff solenoids with a length of wire and a few push-on terminals.

[KTPhil]

Yes, get the usual FI (USA) harness. You can see in the Euro dual carb diagram (earlier year) that the wiring for the carbs is not part of the harness-- it is a separate wire set you can make, and connect to the coil.

[jeremy1973]

Thanks, This helps