Author |
Message |
Doug4 Samba Member
Joined: January 18, 2004 Posts: 6 Location: Phoenix, AZ
|
Posted: Fri Mar 16, 2018 3:44 pm Post subject: 3 Fold Ragtop Measurements Needed to graft in-Please Help! |
|
|
I am getting ready to graft an original 3 fold ragtop clip into my '55 hard top Oval so I need the measurement from the windshield glass edge to the front lip of the ragtop clip and the measurement from the rear edge opening to the top of the Oval window glass top edge so I know the grafted clip is centered front to back in the roof, please help a brother out!! I am sure my rubber has shrunk over the years so using the glass a point of reference should be more accurate, thanks in advance for the help. |
|
Back to top |
|
|
57BLITZ Samba Member
Joined: June 12, 2012 Posts: 2385 Location: DEEK - U.S.A.
|
|
Back to top |
|
|
Doug4 Samba Member
Joined: January 18, 2004 Posts: 6 Location: Phoenix, AZ
|
Posted: Sat Mar 17, 2018 11:02 am Post subject: Re: 3 Fold Ragtop Measurements Needed to graft in-Please Help! |
|
|
That previous post said 148-149.5 from the leading edge of the body to the latch hole,
That is 5.8 inches which is the same as the 2 fold???
Is that right?
Is the 3 fold just longer in the back then? |
|
Back to top |
|
|
Porsche904 Samba Member
Joined: March 14, 2014 Posts: 192
|
Posted: Mon Mar 19, 2018 1:46 pm Post subject: Re: 3 Fold Ragtop Measurements Needed to graft in-Please Help! |
|
|
Doug4 wrote: |
That previous post said 148-149.5 from the leading edge of the body to the latch hole,
That is 5.8 inches which is the same as the 2 fold???
Is that right?
Is the 3 fold just longer in the back then? |
yes, just longer otherwise no difference in width |
|
Back to top |
|
|
|