| Author |
Message |
&Dan
Samba Member
Joined: January 29, 2008
Posts: 1784
|
 Posted: Sat Apr 21, 2018 11:12 am Post subject: Best Pump/Cover for a Full-Flowed 40-Horse Case |
 |
|
| This is a mid-'65 case. Were it up to you, what would you go with, and from whom? Many thanks. |
|
| Back to top |
|
 |
esde
Samba Member
Joined: October 20, 2007
Posts: 5966
Location: central rust belt
|
| Posted: Sat Apr 21, 2018 7:22 pm Post subject: Re: Best Pump/Cover for a Full-Flowed 40-Horse Case |
|
|
I have had Berg covers that were drilled for the 6mm studs, no idea if they are still offered. They are about as nice a cover as you can get, IMO.
SD
_________________
modok wrote:
Bent cranks are silent but gather no moss. I mean, ah, something like that. |
|
| Back to top |
|
|
&Dan
Samba Member
Joined: January 29, 2008
Posts: 1784
|
| Posted: Sun Apr 22, 2018 7:15 am Post subject: Re: Best Pump/Cover for a Full-Flowed 40-Horse Case |
|
|
| esde wrote: |
I have had Berg covers that were drilled for the 6mm studs, no idea if they are still offered. They are about as nice a cover as you can get, IMO.
SD |
Funny you should mention that as I do have an old Berg cover in my bag of tricks. Kinda wanted to hold on to it as this is for a client, but what the heck, she's a great client so maybe I will just do that. And of course plug the hole in the old pump and call it a day.
I guess a guy could braze in the holes and redrill for the ittybitty studs and call it good. |
|
| Back to top |
|
|
wellib
Samba Member
Joined: May 31, 2018
Posts: 1
|
| Posted: Sun Jun 03, 2018 6:43 am Post subject: Re: Best Pump/Cover for a Full-Flowed 40-Horse Case |
|
|
| Modified my own. Located the area of pressure side of pump cover, drilled and tapped for npt threads installed and oriented fitting, and surfaced the pump side after brazing the fitting. |
|
| Back to top |
|
|
|
