Author |
Message |
flyboyaviator Samba Member
Joined: November 29, 2009 Posts: 154 Location: South Florida
|
Posted: Sun May 20, 2018 7:09 am Post subject: Re: Starter adapter: Why did I wait? |
|
|
What's the Valeo starter model #? |
|
Back to top |
|
|
westyventures Samba Member
Joined: December 29, 2004 Posts: 2306 Location: Oregon Outback
|
Posted: Sun May 20, 2018 11:46 am Post subject: Re: Starter adapter: Why did I wait? |
|
|
flyboyaviator wrote: |
What's the Valeo starter model #? |
I don't recommend the Valeo starters, oftentimes they don't fit for some reason. The Latrical starters are excellent quality and less expensive. |
|
Back to top |
|
|
wesitarz Samba Member
Joined: August 20, 2012 Posts: 1491 Location: Victoria,B.C.Canada
|
Posted: Sun May 20, 2018 12:07 pm Post subject: Re: Starter adapter: Why did I wait? |
|
|
The Valeo starter (my used one experience) has an extra tooth on the gear and the shape is out-of-round so it does not fit the adapter. |
|
Back to top |
|
|
DanHoug Samba Member
Joined: December 05, 2016 Posts: 4789 Location: Bemidji, MN
|
Posted: Mon Mar 11, 2019 11:50 am Post subject: Re: Starter adapter: Why did I wait? |
|
|
well... add me to the list of very impressed customers. ever since my rebuild 10k miles ago, my new Bosch OEM starter would balk like it was fighting compression or advanced timing. always started but never confident sounding.
put the adapter plate on with an LActrical starter as well as an additional ground cable directly to the starter. holy smokes. super confident cranking with no hint of stoppage. current draw seems less, also, as i was able to crank for an extended period with the battery staying up as i was trying to prime the oil pump. i'm concluding my Bosch OEM rebuilt was simply weak.
all that said, i'm not sure the engine itself cranks faster. it SOUNDS faster as it is a gear reduction unit but i haven't looked at the crank pulley while it is cranking to see if it actually IS spinning faster. but it is absolutely more consistent and confident in cranking. _________________ -dan
60% of what you find on the internet is wrong, including this post.
'87 Westy & '89 Westy both 2.1 4spd
Past projects can be found at--
www.thefixitworkshop.com |
|
Back to top |
|
|
|