Snap On tools for Volkswagen

[diablosandwich]

I thought I would start a thread on Snap on tools for air cooled vw's. I have had some of these tools for over twenty years. These are well made tools that make a job a lot easier.

S5911 13/14mm manifold/obstruction wrench

S5922 13mm valve adjust wrench.

S5919 condenser install tool. For aluminum distributors from 60's. Drives condenser into bottom of distributor. No need for Muir's scout knife with one of these!

S5912 Brake adjuster

S5913 7/11mm brake bleeder wrench. This one is NOS with original sticker on it. I have a 7/11mm brake wrench made by KD that is a flared 11mm for soft brake lines that I like better than this one.

S5902 17/21mm Oil service wrench 21mm for engine oil drain plug and 17mm external for trans oil fill/drain plugs. A copy of the Hazet service wrench.

S5915 oil cooler 10mm wrench. Used to remove oil cooler with engine in car on non doghouse coolers. I have a similar Matra one.

S5914 Front engine seal installer. Threads into crankshaft and nut pushes installer in square. In original box.

I would like to see what other VW snap on tools are out there. Thanks, Casey
_________________
1966 Java Greens

[gt1953]

The S5912 Brake adjuster tool, I found that one at the local pawn shop for .75 cents. It still had the Snap On price sticker on it.
_________________
Volkswagen: We tune what we drive.
Numbers Matching VW's are getting harder to find. Source out the most Stock vehicle and keep that way. You will be glad you did.

72 type 1
72 Squareback
({59 Euro bug, 62, 63, 67, 68, 69, 73 type ones 68 & 69 type two, 68 Ghia all sold})

[60ragtop]

here's another Snap-On brake adjuster -bottom and a MAC on the top.
Have some of the other ones in my box as well for over 35 years.

_________________
Rick
Certified Mechanic by the State of Michigan in 1977
ASA certified in 1987
Certified Hunter Wheel Alignment Master Technician 1986

[vdubmyk]

I have a few of the Snap-on .006 12 inch long feeler gauges to adjust the valves.
_________________
64 stock bug, 12V (converted 6v unit), 40 hp, all documents even sales contract and dealer window sticker!

[2Pack]

Cool thread. I always like finding snap-on VW tools.

Here's one not posted yet. 36mm nut whacker. Date coded 1983.

_________________
Please buy my Treasure

[Cusser]

My only Snap-On tool, 8mm triple square drive bit for CV bolts, purchased pre-1975.

_________________
1970 VW (owned since 1972) and 1971 VW Convertible (owned since 1976), second owner of each. The '71 now has the 1835 engine, swapped from the '70. Second owner of each. 1988 Mazda B2200 truck, 1998 Frontier, 2014 Yukon, 2004 Frontier King Cab. All manual transmission except for the Yukon. http://www.thesamba.com/vw/forum/album_page.php?pic_id=335294 http://www.thesamba.com/vw/forum/album_page.php?pic_id=335297

[Lind]

S5908
tool for removing dash escutcheons.

_________________
.
Wanted:
Idaho VW license plate frames or other dealership items.
VWoA literature and early dealership or distributor literature/pictures/information
.

[diablosandwich]

Snap on 13mm Temperature sensor socket S5909

_________________
1966 Java Greens

[diablosandwich]

Snap on S5910 Ball joint eccentric tool. 36mm 13 inches long.
_________________
1966 Java Greens

[rock25rock]

In need of the S5915 oil cooler tool. If anyone has one they are willing to sell, Or knows where to get one, please contact me, thanks.

[oscarsnapkin]

Anyone know if Snap-On made a tool for removing the oil filler on Type 1 engines? I tried googling but I couldn’t come up with anything. Would love to get a part# if it exists.
_________________
- 1977 CEI Sunroof Bus 2.0L F.I. Hydraulic Lifters
- 1973 Thing

"It’s so easy to laugh, it’s so easy to hate, it takes strength to be gentle and kind."

[61SNRF]

[61SNRF]

Special 8mm triple square magnetic socket for AutoStick torque converter bolts.

_________________
-Bruce

An ounce of prevention is worth a pound of cure.