Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Deep dish 4x130?
Forum Index -> Custom Wheel/Tire Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Author Message
74BUHG
Samba Member


Joined: May 24, 2018
Posts: 1
Location: Louisville, KY
74BUHG is offline 

PostPosted: Thu May 24, 2018 11:50 am    Post subject: Deep dish 4x130? Reply with quote

Hi, sorry if the Subject is a bit vague but I've been looking everywhere to try and find a set of deeper dish steel wheels that will still fit the original chrome hub cap. Doing a quick google search will bring up plenty of results for the older 5 lug wheels, but I'm having no luck when it comes to the 4 lug steelies. The look I keep seeing everywhere is what seems to be a standard OEM wheel up front with a deeper OEM in the rear. Any help would be greatly appreciated, Thanks! Picture below for reference.

https://www.whichcar.com.au/features/vw-bug-life-slammed-beetles
Back to top
View user's profile Send private message Classifieds Feedback
Mike Fisher
Samba Member


Joined: January 30, 2006
Posts: 17962
Location: Eugene, OR
Mike Fisher is offline 

PostPosted: Thu May 24, 2018 12:25 pm    Post subject: Re: Deep dish 4x130? Reply with quote

They are All custom made/welded by Stockton Wheel & many others with VW centers & used/new barrels.
http://www.stocktonwheel.com/
_________________
https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold

Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey
Back to top
View user's profile Send private message Send e-mail Facebook Gallery Classifieds Feedback
Rome
Samba Member


Joined: June 02, 2004
Posts: 9602
Location: Pearl River, NY
Rome is offline 

PostPosted: Wed Jun 06, 2018 7:00 pm    Post subject: Re: Deep dish 4x130? Reply with quote

How wide of a wheel are you looking for? As wide as on those slammed early 5-bolt wheels? Will these go on your '74? Here's a 5.5" wide 4-bolt steel wheel for hubcaps which has much more deep dish than a stock 4.5" wheel-
http://www2.cip1.com/ProductDetails.asp?ProductCode=VWC%2D135%2D601%2D025%2DP

I've also seen wider versions which were sold in the '80's.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> Custom Wheel/Tire All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2023, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB
Links to eBay or other vendor sites may be affiliate links where the site receives compensation.