pedal info for anyone that needs this for their build..

[62kellison]

Hi!
this WAS TOLD TO ME FROM A GENTLEMEN ON EBAY WHEN I ASKED FOR PEDAL ASSEMBLY CROSSSHAFT DIAMETER.MAYBE IT CAN HELP SOMEONE ELSE, AS IT DID ME.


The diameter of the shaft didn't change from 58-on, just the hook where the cable attaches changed. The 58-64 is flat and small, 65-mid 72 is angled and small, and mid 72-79 is flat and large. The 57 and earlier style is completely different in every way possible but you normally don't see those pedal assemblies. The shafts on all the 58-on pedal shafts are around 14.34-14.37mm. Now, the clutch fork shaft back at the transmission did get thicker in 73 but that didn't correlate to anything having to do with the pedal assembly. We're adding the other three pedal shafts this weekend to ebay.

Thanks!
Eric
Bughaus.com

[62kellison]

update sent to me.hopefully this is correct now..... Actually I had the 58-64 and 65-72 mixed up - the 58-64 is angled while the 65-72 is flat. We just listed the other two pedal shafts - you can find them in our auctions now. If there are any other measurements you need off of them just let me know.

Thanks!
Eric
Bughaus.com