Author |
Message |
scottf1887 Samba Member
Joined: March 14, 2014 Posts: 139 Location: Tejas Baby!!
|
Posted: Sun Aug 12, 2018 7:52 am Post subject: How not to install a motor... |
|
|
Here's what I get for trying to get a job done quickly...I must have installed a thousand motors and never thought I'd of done this! Backwards throw out bearing. Hopefully these pics help someone down the road to not do this! What do y'all think about the collar on the pressure plate? I'm inspecting it, seems usable still. It's one of the removable Kennedy ones. Obviously the bearing is shit at this point...enjoy!
|
|
Back to top |
|
|
67rustavenger Samba Member
Joined: February 24, 2015 Posts: 9767 Location: Oregon
|
Posted: Sun Aug 12, 2018 8:04 am Post subject: Re: How not to install a motor... |
|
|
Wow! I've done allot of dumb things on cars. Wow.
It's probably a good idea to replace the collar on the PP.
Good Luck. _________________ I have learned over the years.
Cheap parts are gonna disappoint you.
Buy Once, Cry Once!
There's never enough time to do it right the first time. But there's always enough time to do it thrice.
GFY's Xevin and VW_Jimbo! |
|
Back to top |
|
|
busman78 Samba Member
Joined: August 17, 2004 Posts: 4524 Location: Oklahoma City, OK
|
Posted: Sun Aug 12, 2018 8:32 am Post subject: Re: How not to install a motor... |
|
|
Looks like you need a little hammer work on the transmission bracket, that or is that a spout to let the water drip off. |
|
Back to top |
|
|
Dale M. Samba Member
Joined: April 12, 2006 Posts: 20379 Location: Just a tiny bit west of Yosemite Valley
|
Posted: Sun Aug 12, 2018 8:58 am Post subject: Re: How not to install a motor... |
|
|
IF it were mine there is no question, replace TO bearing and ring on pressure plate, but that is just my anal/ocd thinking...
Dale _________________ “Fear The Government That Wants To Take Your Guns" - Thomas Jefferson.
"Kellison Sand Piper Roadster" For Street & Show.
"Joe Pody Sandrover" Buggy with 2180 for Autocross (Sold)
============================================================
All suggestions and advice are purely my own opinion. You are free to ignore them if you wish ... |
|
Back to top |
|
|
mark tucker Samba Member
Joined: April 08, 2009 Posts: 23937 Location: SHALIMAR ,FLORIDA
|
Posted: Sun Aug 12, 2018 10:07 am Post subject: Re: How not to install a motor... |
|
|
that should buff out,might need to add a little rock crusier epoxie and drill some 2" holes in the bell housin so you can keep an eye on it. |
|
Back to top |
|
|
|