Author |
Message |
snorkelfork Samba Member
Joined: June 03, 2013 Posts: 29 Location: Austin, TX
|
Posted: Thu Aug 16, 2018 3:52 pm Post subject: Subaru 2.2 Burley Perimeter Pipe Conundrum |
|
|
In the process of a full coolant system upgrade on my EJ22. New stainless undercarriage pipes as well as the Perimeter and Coolant pipes from Burley.
When bought them we spoke on the phone but he didn't remember the numbers for the hoses needed.
Generally I am very resourceful when it comes to finding what I need without asking but I can not for the life of me locate a Napa (or any brand) part number for the 135º 1.5 I.D. hose that leads from the Manifold on the left side of the engine to the Burley Perimeter pipe.
If anyone has number for this or for any of the hoses they used for this set up it would be much appreciated |
|
Back to top |
|
|
Kombi///M3 Samba Member
Joined: March 16, 2011 Posts: 427 Location: Vancouver, BC
|
Posted: Thu Aug 16, 2018 5:18 pm Post subject: Re: Subaru 2.2 Burley Perimeter Pipe Conundrum |
|
|
I used 22945 from Napa or lordco.. you have to cut it to make the right length.
I have 2.5 not sure if it makes any diff.
Cheers. |
|
Back to top |
|
|
snorkelfork Samba Member
Joined: June 03, 2013 Posts: 29 Location: Austin, TX
|
Posted: Fri Aug 17, 2018 7:54 am Post subject: Re: Subaru 2.2 Burley Perimeter Pipe Conundrum |
|
|
That appears to be a 90º 1.75 I.D. Doesn't the 2.5 use the same or similar manifold? |
|
Back to top |
|
|
Kombi///M3 Samba Member
Joined: March 16, 2011 Posts: 427 Location: Vancouver, BC
|
Posted: Fri Aug 17, 2018 9:44 am Post subject: Re: Subaru 2.2 Burley Perimeter Pipe Conundrum |
|
|
It’s not 90deg. Fits perfect. |
|
Back to top |
|
|
snorkelfork Samba Member
Joined: June 03, 2013 Posts: 29 Location: Austin, TX
|
Posted: Thu Aug 30, 2018 11:52 am Post subject: Re: Subaru 2.2 Burley Perimeter Pipe Conundrum |
|
|
Got that worked out, thanks for your help! |
|
Back to top |
|
|
|