Looking for a torsion

[Dbazzett]

Im looking for a custom torsion. Stock width, for use with stock torsiin bars and stock type end plates. I need it with nothing but the irs arm mounts. No horns, no trans mount. Just center spline amd end plates. Who makes such an animal or who sells the parts to do it in my own shop. I have the capability and tools.

[Manx1173]

Berrien Buggy by Acme makes one

http://www.acmecarco.com/berrien-buggy/sand-rails/options-and-accessories

David Barrett also makes one (see last photo in ad) and might work with you to make it how you want

https://www.thesamba.com/vw/classifieds/detail.php?id=1099737

[cbeck]

appletree auto in michigan?
_________________
My cut in half and rebuild thread
www.thesamba.com/vw/forum/viewtopic.php?t=647779

[JWHracing]

Kartek:

Standard adjuster, King Kong adjuster, or no adjuster.

https://www.kartek.com/parts/rear-irs-vw-torsion-h...sters.html
https://www.kartek.com/parts/rear-irs-vw-torsion-h...sters.html
https://www.kartek.com/parts/rear-irs-vw-torsion-housing-40-14-width-no-torsion-adjusters.html
_________________
65 Baja - Class 5 Unlimited Race Car

2021 STORR Pro Air Cooled Buggy Champion
2019 AZOP Unlimited Buggy Champion
2017 SADR 1300 Class Champion
2016 AZOP Limited Buggy Champion

Currently "retired" from racing

[jimmyhoffa]

GET THE ADJUSTER ONE!! I have a SAW King Kong adjuster in my old Chenowth's stock beetle torsion (early Chenowth play cars had VW torsions) and it is so cool not having to re-index torsion bars and stuff. If you're not going coil-over, its the coolest way to use torsion bars.
_________________
1974 Chenowth 2RL #1244 Street Legal
My other car isn't ridiculous.

[Dbazzett]

I stopped at the local steel shop and bought some 2.500 dom tube. .120 wall. Ordered the parts i needed from pacific customs. Ill make my own. Mid travel plates.