Author |
Message |
Albertoprop17 Samba Member
Joined: March 15, 2016 Posts: 196 Location: Valencia (Spain)
|
Posted: Tue Mar 26, 2019 6:00 am Post subject: Help with VDO rpm tachometer |
|
|
Hi everyone, I purchased this original vdo rpm gauge for my 54 oval beetle
I don't have the wiring diagram for it, but it has the marks for +, signal and -
I can read these on the reverse:
Made in Germany
28 79
16000
10.63
On the right top side, is marked this:
53
9.63
_________________ '54 vintage speed beetle slow project
Visit my workshop site and leave a like:
https://www.facebook.com/talleresalacreu/ |
|
Back to top |
|
|
EverettB Administrator
Joined: April 11, 2000 Posts: 69809 Location: Phoenix Metro
|
Posted: Tue Mar 26, 2019 8:14 am Post subject: Re: Help with VDO rpm tachometer |
|
|
Are you asking how to hook it up?
+ goes to power
1 goes to the "1" terminal on the coil
- goes to a ground connection
Ground is the connection on the far right without the black surround
The terminal at the top of the gauge is for the light. _________________ How to Post Photos
Everett Barnes - [email protected] | My wanted ads
"Water is the only drink for a wise man" | "Communication prevents complaints"
Stop dead photo links! Post your photos to The Samba Gallery! |
|
Back to top |
|
|
Albertoprop17 Samba Member
Joined: March 15, 2016 Posts: 196 Location: Valencia (Spain)
|
Posted: Tue Mar 26, 2019 8:35 am Post subject: Re: Help with VDO rpm tachometer |
|
|
EverettB wrote: |
Are you asking how to hook it up?
+ goes to power
1 goes to the "1" terminal on the coil
- goes to a ground connection
Ground is the connection on the far right without the black surround
The terminal at the top of the gauge is for the light. |
That is what I was thinking, thanks!
If I am right, it is dated in 9.63-10.63, but I don't know what the other numbers mean.
One question… How can I remove the light? It's tight and I don't want to break anything _________________ '54 vintage speed beetle slow project
Visit my workshop site and leave a like:
https://www.facebook.com/talleresalacreu/ |
|
Back to top |
|
|
EverettB Administrator
Joined: April 11, 2000 Posts: 69809 Location: Phoenix Metro
|
Posted: Tue Mar 26, 2019 5:03 pm Post subject: Re: Help with VDO rpm tachometer |
|
|
The 9.63 / 10.63 are date stamps for when it was made.
The other numbers I do not know.
The light should just pull out but it could be stuck.
It's probably best to try to pull it straight out but:
If you can grab it lightly you could try rotating the bulb holder by the circular outer edge but it's easy to smash or deform it. _________________ How to Post Photos
Everett Barnes - [email protected] | My wanted ads
"Water is the only drink for a wise man" | "Communication prevents complaints"
Stop dead photo links! Post your photos to The Samba Gallery! |
|
Back to top |
|
|
Albertoprop17 Samba Member
Joined: March 15, 2016 Posts: 196 Location: Valencia (Spain)
|
Posted: Wed Mar 27, 2019 5:01 am Post subject: Re: Help with VDO rpm tachometer |
|
|
The light is very tight but it come out with no problem. It is 12v 2w f6.
I will post a video when I have the tach working _________________ '54 vintage speed beetle slow project
Visit my workshop site and leave a like:
https://www.facebook.com/talleresalacreu/ |
|
Back to top |
|
|
alanhall Samba Member
Joined: February 18, 2006 Posts: 115 Location: Northern California
|
Posted: Wed Mar 27, 2019 7:42 pm Post subject: Re: Help with VDO rpm tachometer |
|
|
I would think that you need to find out what this is out of as I believe calibration depends on if it for a 4, 6 or 8 cylinder engine. |
|
Back to top |
|
|
Albertoprop17 Samba Member
Joined: March 15, 2016 Posts: 196 Location: Valencia (Spain)
|
|
Back to top |
|
|
|