Author |
Message |
meassick Samba Member
Joined: August 17, 2011 Posts: 18 Location: Wisconsin
|
Posted: Sun Sep 15, 2019 10:54 am Post subject: 2000 EVC FOB and remote access |
|
|
My EVC has two button FOB's without the flip key
I have replaced the batteries and the red LED blinks when a button is pushed. The van does not respond to any buttons that are pushed. I have tried the programming but get no response with this method
Manual Programming
1) Unlock the door to your car using the key blade
2) Insert your old key blade into the ignition and turn it to the "on" position, but do not start the car.
3) Roll down your driver's side window
4) Step out of the car and insert your new key into the driver's door lock, now turn the key to the left and hold it in that position for 10 seconds.
5) Now press the lock button on the FOB
6) Now press the unlock button on the FOB
Any ideas? I do have VCDS if that is useful. |
|
Back to top |
|
|
IdeaNerd Samba Member
Joined: May 24, 2016 Posts: 598 Location: Central California
|
Posted: Fri Sep 20, 2019 11:38 am Post subject: Re: 2000 EVC FOB and remote access |
|
|
I've never seen one of these "two button fobs without a flip key" -- I thought all the remote VW fobs (at least of this era) were flip keys. What does yours look like? |
|
Back to top |
|
|
meassick Samba Member
Joined: August 17, 2011 Posts: 18 Location: Wisconsin
|
Posted: Sat Sep 28, 2019 9:53 am Post subject: Re: 2000 EVC FOB and remote access |
|
|
Here is a photo of my key and fob. Both keys are the same and the LEDs blink when a button is pressed. Has HV on reverse side of key
|
|
Back to top |
|
|
|