Author |
Message |
rfoubi Samba Member
Joined: March 21, 2004 Posts: 224 Location: Rossland BC
|
Posted: Sun Nov 10, 2019 10:57 am Post subject: is this a conical or ball seat lug nut? |
|
|
Trying to order a couple new lug nuts |
|
Back to top |
|
|
Wildthings Samba Member
Joined: March 13, 2005 Posts: 50352
|
Posted: Sun Nov 10, 2019 11:14 am Post subject: Re: is this a conical or ball seat lug nut? |
|
|
It looks like a ball style lug. What wheels are you using it with? The lug style needs to match the wheels. |
|
Back to top |
|
|
rfoubi Samba Member
Joined: March 21, 2004 Posts: 224 Location: Rossland BC
|
Posted: Sun Nov 10, 2019 11:31 am Post subject: Re: is this a conical or ball seat lug nut? |
|
|
14" steel wheels and 15" steel wheels. So likely ball seat but neither are stock so wanted to be sure |
|
Back to top |
|
|
Sodo Samba Member
Joined: July 06, 2007 Posts: 9618 Location: Western WA
|
Posted: Sun Nov 10, 2019 12:17 pm Post subject: Re: is this a conical or ball seat lug nut? |
|
|
I don’t know if “spherical” is correct terminology.
But the bolts noted are OEM from Audi 5000 wheels.
But maybe the pic helps.
I eventually bought “ball seat” nuts from T3 Technique. _________________
'90 Westy EJ25, 2Peloquins, 3knobs, pressure-oiled GT mainshaft, filtered, cooled gearbox
'87 Tintop w 47k 53k, '12 SmallCar EJ25, cooled filtered gearbox
....KTMs, GasGas, SPOT mtb |
|
Back to top |
|
|
vanagonjr Samba Member
Joined: October 07, 2010 Posts: 3431 Location: Dartmouth, Mass.
|
Posted: Sun Nov 10, 2019 3:26 pm Post subject: Re: is this a conical or ball seat lug nut? |
|
|
Note that there are 12mm and 14mm radius ball seat lugs/studs.
It is common for M12 lugs to have to 12mm seat and same for M14, however some cars, (some Audi’s for sure) are M14 with a 12mm radius. _________________ John - 86 Wolfsburg Westfalia "Weekender"
Flint reversed 1.8T W/Passat 5-Speed
LiMBO (late model bus club) www.limbobus.org
LiMBO is on Facebook too! https://www.facebook.com/groups/
FAQ thread: http://www.thesamba.com/vw/forum/viewtopic.php?t=525798 |
|
Back to top |
|
|
|