| Author |
Message |
pjtaxi
Samba Member
Joined: December 31, 2013
Posts: 121
Location: Yakima Washington
|
 Posted: Tue Dec 10, 2019 7:53 am Post subject: Spray can primer |
 |
|
| Has anyone sprayed satin clear over primer to seal it? Would like to seal primer as I repair parts of bay. Thanks for any info |
|
| Back to top |
|
 |
jspbtown
Samba Member
Joined: January 27, 2004
Posts: 5157
|
| Posted: Tue Dec 10, 2019 11:09 am Post subject: Re: Spray can primer |
|
|
To answer your question....no I have not.
You could always use a good two part epoxy primer to seal your work |
|
| Back to top |
|
|
iamdonquixote
Samba Member
Joined: January 28, 2003
Posts: 2041
Location: M*ssholia
|
| Posted: Tue Dec 10, 2019 12:35 pm Post subject: Re: Spray can primer |
|
|
if I understand your question, you have spray can primer that you want to seal with clear?
Doesn't sound like a great idea to me, I'd just use a good epoxy primer from a gun. |
|
| Back to top |
|
|
carlos_magnum
Samba Member
Joined: April 21, 2009
Posts: 591
|
| Posted: Wed Dec 11, 2019 12:06 am Post subject: Re: Spray can primer |
|
|
| Clear urethane can be applied over primer although it is not a common method. |
|
| Back to top |
|
|
Mike Fisher
Samba Member
Joined: January 30, 2006
Posts: 17970
Location: Eugene, OR
|
| Posted: Wed Dec 11, 2019 2:15 pm Post subject: Re: Spray can primer |
|
|
Phosphoric acid solution on all bare metal is the best/easiest/convenient sealer against rust.
Use red-oxide rattle can primer to get it all 1 color while you're doing bodywork.
Red-oxide shows all the flaws that need more bodywork.
2 part epoxy primer & sealer before you finish paint/clear the car for reassembly.
_________________
https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold
Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey |
|
| Back to top |
|
|
|
