| Author |
Message |
simpsoncan2
Samba Member
Joined: November 17, 2003
Posts: 128
Location: Clermont, FL
|
 Posted: Thu Mar 26, 2020 8:29 am Post subject: Firewall tin is not mating with the firewall seal |
 |
|
Has anyone encountered this situation? The driver's side firewall tin is not mating with the firewall seal. Transaxle mounts are new. Everything appears to be in alignment and centered with regard to the transaxle and the body/frame horns. The cylinder tins and breast plat tins all align with seal in other areas. Nothing appears to be bent. I am assuming the firewall tin to be original. Did Things have specific firewall tins? Am I overlooking something? Thanks in advance.
Driver's side:
Passenger side:
Engine out before reinstall:
_________________
Jacob |
|
| Back to top |
|
 |
Wildthings
Samba Member
Joined: March 13, 2005
Posts: 50350
|
| Posted: Thu Mar 26, 2020 9:58 am Post subject: Re: Firewall tin is not mating with the firewall seal |
|
|
| I am going to guess that you have a transporter front tin, or at least one from another application. |
|
| Back to top |
|
|
|
