Author |
Message |
Tall Bloke Samba Member
Joined: October 07, 2005 Posts: 233 Location: UK>Ohio>UK
|
Posted: Wed May 01, 2013 8:01 am Post subject: Karmann Ghia (Large and Small) badge mount position. |
|
|
I have an early ghia with the later "Karmann Ghia " (small) badge (Approx. 9" long -from 1963 onwards ?!) on the rear deck lid, I have managed to obtain an original large badge (12" long) and want to position it correctly - do any of the hole positions over-lap between old style and new style or can anybody give dimensions or produce a template for the holes for the larger badge location?
The deck lid is original to the car (December 1958), but without removing paint, there aren't any tell tale signs from the top or under neath to see the original hole positions.
I tried to search but nothing specific to the rear badge position came up.
Thanks for your help. _________________ -------------------
All of 30 horses ! |
|
Back to top |
|
|
John Moxon Samba Moderator
Joined: March 07, 2004 Posts: 13957 Location: Southampton U.K.
|
|
Back to top |
|
|
Tall Bloke Samba Member
Joined: October 07, 2005 Posts: 233 Location: UK>Ohio>UK
|
Posted: Thu May 02, 2013 4:39 am Post subject: |
|
|
John - Thats perfect- I will investigate if there are any common holes that will align - Cheers again -
By the way - you keep the Ghia in the Garage!- Is this temporary until you can get it in the living room ?
Or do what I am doing - making the garage comfy - Fridge, music - wide screen TV, bed ! etc, _________________ -------------------
All of 30 horses ! |
|
Back to top |
|
|
John Moxon Samba Moderator
Joined: March 07, 2004 Posts: 13957 Location: Southampton U.K.
|
|
Back to top |
|
|
philermonic Samba Member
Joined: November 09, 2010 Posts: 361 Location: Orange County, California
|
Posted: Thu May 02, 2013 11:44 pm Post subject: |
|
|
John Moxon wrote: |
Just been out to the garage to take a picture...sorry about the dust on the lid.
Have no idea about the commonality of the holes. |
Took a picture - sorry about the paint and the missing Shorrock badge.
I have a '62 and only assume it is a '62 lid. The Badge and orientation are a little different, but the measurements are close to John's.
_________________ "A camel is a horse designed by a Committee" |
|
Back to top |
|
|
philermonic Samba Member
Joined: November 09, 2010 Posts: 361 Location: Orange County, California
|
Posted: Thu May 02, 2013 11:57 pm Post subject: |
|
|
John Moxon wrote: |
Just been out to the garage to take a picture...sorry about the dust on the lid.
Have no idea about the commonality of the holes. |
p.s. this is just over 9" wide _________________ "A camel is a horse designed by a Committee" |
|
Back to top |
|
|
John Moxon Samba Moderator
Joined: March 07, 2004 Posts: 13957 Location: Southampton U.K.
|
|
Back to top |
|
|
philermonic Samba Member
Joined: November 09, 2010 Posts: 361 Location: Orange County, California
|
Posted: Fri May 03, 2013 12:30 am Post subject: |
|
|
John Moxon wrote: |
philermonic wrote: |
John Moxon wrote: |
Just been out to the garage to take a picture...sorry about the dust on the lid.
Have no idea about the commonality of the holes. |
p.s. this is just over 9" wide |
You have the later (smaller) script Phil. Not sure at what vin number the change was made but it is at the 62/63 change...I hesitate to say model year as there has long been a dispute over the existence of model years before '65. |
It is a November 14, 1962 according to the birth certificate, and no one knows for certain if it is '62 or '63, I use '62. _________________ "A camel is a horse designed by a Committee" |
|
Back to top |
|
|
c21darrel Samba Member
Joined: January 22, 2009 Posts: 8211 Location: San Dimas
|
|
Back to top |
|
|
sputnick60 Samba Moderator
Joined: July 22, 2007 Posts: 3916 Location: In Molinya Orbit
|
Posted: Sat Jul 29, 2017 3:14 am Post subject: Re: Karmann ghia(Large) badge mount position. |
|
|
Prompted by another thread
Here are some detailed photos for the deck lid placement of the Karmann Ghia script showing the 24 cm (9.5 inch) script using the original holes on my 1966 Ghia. This should be a match for model years 1963 to 1974. Note that the inside dimensions use a reference line derived from the inner sheet metal which is likely different for the models having the plastic rain tray.
Nicholas _________________ '66 Karmann Ghia Cabriolet...
'65 Porsche 356C Coupe...
2005 Mecedes Benz C180 Kompressor Estate
Stop dead photo links! Post your photos to The Samba Gallery! |
|
Back to top |
|
|
Angus Dowrie Samba Member
Joined: March 07, 2005 Posts: 341 Location: Kangaroo Point, Australia
|
Posted: Mon Jul 31, 2017 9:01 pm Post subject: |
|
|
philermonic wrote: |
John Moxon wrote: |
philermonic wrote: |
John Moxon wrote: |
Just been out to the garage to take a picture...sorry about the dust on the lid.
Have no idea about the commonality of the holes. |
p.s. this is just over 9" wide |
You have the later (smaller) script Phil. Not sure at what vin number the change was made but it is at the 62/63 change...I hesitate to say model year as there has long been a dispute over the existence of model years before '65. |
It is a November 14, 1962 according to the birth certificate, and no one knows for certain if it is '62 or '63, I use '62. |
My ghia was built in mid October 1962. It is referred to as a '63 model being post August but as John suggests above this was something that was a bit 'looser' in definition before the mid 60's.
I can confirm from a very original car that your decklid should have the small KG script on top, and it also should have a Volkswagen badge beside the licence plate area, see the photo below. Other difference to a later '63 model is the stale-air 40HP engine. Can't quite recall when but in the first few months of 1963 they changed to the fresh-air engine- yours should be stale-air.
_________________ 1963 Australian Delivery RHD Coupe
Build thread;
http://www.thesamba.com/vw/forum/viewtopic.php?t=610414 |
|
Back to top |
|
|
jeffrey8164 Samba Member
Joined: January 06, 2018 Posts: 3818 Location: Georgia
|
Posted: Mon Sep 10, 2018 9:42 am Post subject: Re: Karmann Ghia (Large and Small) badge mount position. |
|
|
Fresh Air VS Stale Air?
Please elaborate. |
|
Back to top |
|
|
c21darrel Samba Member
Joined: January 22, 2009 Posts: 8211 Location: San Dimas
|
|
Back to top |
|
|
jeffrey8164 Samba Member
Joined: January 06, 2018 Posts: 3818 Location: Georgia
|
Posted: Mon Sep 10, 2018 4:36 pm Post subject: Re: Karmann Ghia (Large and Small) badge mount position. |
|
|
Sounds reasonable. I'll buy it. |
|
Back to top |
|
|
prayap Samba Member
Joined: October 04, 2011 Posts: 18
|
Posted: Sun May 10, 2020 2:50 am Post subject: Re: Karmann Ghia (Large and Small) badge mount position. |
|
|
Hello All,
I need to make a holes to installl the large.
Currently I have the small one but the holes arenīt the same.
Will be great if someone can upload a picture wiht the meassures to see where I must to make the holes.
Thanks. |
|
Back to top |
|
|
Marcdeb Samba Member
Joined: May 22, 2019 Posts: 3033 Location: Vermont
|
Posted: Sun May 10, 2020 4:17 am Post subject: |
|
|
John Moxon wrote: |
Tall Bloke wrote: |
By the way - you keep the Ghia in the Garage!- Is this temporary until you can get it in the living room ?
Or do what I am doing - making the garage comfy - Fridge, music - wide screen TV, bed ! etc, |
Haha...unfortunately it shares the garage with the clothes dryer hence the dust. I should use the dust-sheet I have for it but I can't bare to cover such beauty. |
Oh the misery?? I also have a car cover, and although my car is temporarily not here, when it was, I would look for excuses to go to the garage just to get a peek, so once it's back, I don't think I will be able to cover it. _________________ Marc
68 Karmann Ghia Cabrio Autostick
71 Karmann Ghia Cabrio
Previously Owned:
2011 VW EOS Hard Top Conv
2008 Saab 9-3 2.0T Conv
2003 Saab 9-3 SE Conv
2001 Saab 9-3 Conv
1998 BMW 3 Series Conv
1997 Saab 900 Conv
1997 Mazda Miata
68 Ghia Vert Survivor with 22,350 miles: https://www.thesamba.com/vw/forum/viewtopic.php?t=768107&highlight=
71 Ghia Vert Restoration: https://www.thesamba.com/vw/forum/viewtopic.php?t=726710&postorder=asc |
|
Back to top |
|
|
rbsurfguy Samba Member
Joined: August 10, 2008 Posts: 1757 Location: Fairfax, Northern Virginia Formerly Huntington Beach, SoCal
|
Posted: Sun May 10, 2020 4:49 am Post subject: Re: Karmann ghia(Large) badge mount position. |
|
|
Prayap, this picture was posted above in this thread, is this what you are looking for??
sputnick60 wrote: |
Prompted by another thread
Here are some detailed photos for the deck lid placement of the Karmann Ghia script showing the 24 cm (9.5 inch) script using the original holes on my 1966 Ghia. This should be a match for model years 1963 to 1974. Note that the inside dimensions use a reference line derived from the inner sheet metal which is likely different for the models having the plastic rain tray.
Nicholas |
_________________ 1971 Ghia convertible (Body off rebuild)
2019 VW Atlas 4Motion
2012 Passat-Sold
See my build on The Samba at:
Jeff's 71 Vert Restoration/Reassembly http://www.thesamba.com/vw/forum/viewtopic.php?t=6...highlight= |
|
Back to top |
|
|
prayap Samba Member
Joined: October 04, 2011 Posts: 18
|
Posted: Sun May 10, 2020 5:25 am Post subject: Re: Karmann ghia(Large) badge mount position. |
|
|
Hello Rbsurfguy, yes it is but I need the long anagram. It is a small one.
Thanks
rbsurfguy wrote: |
Prayap, this picture was posted above in this thread, is this what you are looking for??
sputnick60 wrote: |
Prompted by another thread
Here are some detailed photos for the deck lid placement of the Karmann Ghia script showing the 24 cm (9.5 inch) script using the original holes on my 1966 Ghia. This should be a match for model years 1963 to 1974. Note that the inside dimensions use a reference line derived from the inner sheet metal which is likely different for the models having the plastic rain tray.
Nicholas |
|
|
|
Back to top |
|
|
sputnick60 Samba Moderator
Joined: July 22, 2007 Posts: 3916 Location: In Molinya Orbit
|
Posted: Sun May 10, 2020 5:59 am Post subject: Re: Karmann ghia(Large) badge mount position. |
|
|
prayap wrote: |
Hello Rbsurfguy, yes it is but I need the long anagram. It is a small one.
Thanks
rbsurfguy wrote: |
Prayap, this picture was posted above in this thread, is this what you are looking for??
sputnick60 wrote: |
Prompted by another thread
Here are some detailed photos for the deck lid placement of the Karmann Ghia script showing the 24 cm (9.5 inch) script using the original holes on my 1966 Ghia. This should be a match for model years 1963 to 1974. Note that the inside dimensions use a reference line derived from the inner sheet metal which is likely different for the models having the plastic rain tray.
Nicholas |
|
|
John Moxon wrote: |
Just been out to the garage to take a picture...sorry about the dust on the lid.
Have no idea about the commonality of the holes. |
Is that your blue Lowlight in galleria? Use the dimensions from John Moxon. His is also a lowlight same as yours
Nicholas _________________ '66 Karmann Ghia Cabriolet...
'65 Porsche 356C Coupe...
2005 Mecedes Benz C180 Kompressor Estate
Stop dead photo links! Post your photos to The Samba Gallery! |
|
Back to top |
|
|
prayap Samba Member
Joined: October 04, 2011 Posts: 18
|
Posted: Sun May 10, 2020 10:04 am Post subject: Re: Karmann ghia(Large) badge mount position. |
|
|
Hi Nicholas,
Thanks I will try.
Yes it is my KG.
I am restoring and the problem is the car made a lot of changes, like a popup windows and is not easy to get some originals parts, but step by step I will do.
Regards
John Moxon wrote: |
Just been out to the garage to take a picture...sorry about the dust on the lid.
Have no idea about the commonality of the holes. |
Is that your blue Lowlight in galleria? Use the dimensions from John Moxon. His is also a lowlight same as yours
Nicholas[/quote] |
|
Back to top |
|
|
|