Author |
Message |
bnam Samba Member
Joined: July 02, 2006 Posts: 2935 Location: El Dorado Hills CA/ Bangalore, India
|
Posted: Mon Oct 05, 2020 7:38 pm Post subject: Generator ground screw |
|
|
Anyone known what the dimensions of the ground (D-) screw on the generator are? It seems to be an m4. M4 0.8mm pitch. But not sure what length. And will it be a problem if the screw I use is a bit longer than stock? _________________ 1971 1302LS Convertible (RHD) owned since '74
Click to view image
1965 Karmann Ghia Coupe - under restoration
1966 Fiat 1500 Cabrio (with 1600 Twin cam)
1952 Citroen TA 11BL |
|
Back to top |
|
|
vwmerckx Samba Member
Joined: August 12, 2012 Posts: 195 Location: Phoenix, AZ
|
Posted: Mon Oct 05, 2020 8:25 pm Post subject: Re: Generator ground screw |
|
|
part number: N 10 695 1 M4 x 6 cheese head screw |
|
Back to top |
|
|
PDX_VW_Erik Samba Member
Joined: November 15, 2015 Posts: 199 Location: Oregon
|
Posted: Mon Oct 05, 2020 8:38 pm Post subject: Re: Generator ground screw |
|
|
Go PACKERS! _________________ Good decisions come from experience. Experience comes from bad decisions.
mukluk wrote: |
Rather fitting signature line. I think you're going to gain some experience here. |
Optimism will not solve all of your problems, but it will annoy enough people to make it worth the effort. |
|
Back to top |
|
|
Cusser Samba Member
Joined: October 02, 2006 Posts: 31361 Location: Hot Arizona
|
Posted: Tue Oct 06, 2020 8:32 am Post subject: Re: Generator ground screw |
|
|
vwmerckx wrote: |
part number: N 10 695 1 M4 x 6 cheese head screw |
Ace Hardware should have, in little drawers. Or use a longer screw, just thread on a nut and hacksaw to desired length, unscrew the nut. _________________ 1970 VW (owned since 1972) and 1971 VW Convertible (owned since 1976), second owner of each. The '71 now has the 1835 engine, swapped from the '70. Second owner of each. 1988 Mazda B2200 truck, 1998 Frontier, 2014 Yukon, 2004 Frontier King Cab. All manual transmission except for the Yukon. http://www.thesamba.com/vw/forum/album_page.php?pic_id=335294 http://www.thesamba.com/vw/forum/album_page.php?pic_id=335297 |
|
Back to top |
|
|
bnam Samba Member
Joined: July 02, 2006 Posts: 2935 Location: El Dorado Hills CA/ Bangalore, India
|
Posted: Tue Oct 06, 2020 5:57 pm Post subject: Re: Generator ground screw |
|
|
vwmerckx wrote: |
part number: N 10 695 1 M4 x 6 cheese head screw |
Thanks!! _________________ 1971 1302LS Convertible (RHD) owned since '74
Click to view image
1965 Karmann Ghia Coupe - under restoration
1966 Fiat 1500 Cabrio (with 1600 Twin cam)
1952 Citroen TA 11BL |
|
Back to top |
|
|
bnam Samba Member
Joined: July 02, 2006 Posts: 2935 Location: El Dorado Hills CA/ Bangalore, India
|
Posted: Tue Oct 06, 2020 5:58 pm Post subject: Re: Generator ground screw |
|
|
PDX_VW_Erik wrote: |
Go PACKERS! |
Yes! Was up early morning to watch the game with my son. _________________ 1971 1302LS Convertible (RHD) owned since '74
Click to view image
1965 Karmann Ghia Coupe - under restoration
1966 Fiat 1500 Cabrio (with 1600 Twin cam)
1952 Citroen TA 11BL |
|
Back to top |
|
|
bnam Samba Member
Joined: July 02, 2006 Posts: 2935 Location: El Dorado Hills CA/ Bangalore, India
|
Posted: Tue Oct 06, 2020 5:58 pm Post subject: Re: Generator ground screw |
|
|
vwmerckx wrote: |
part number: N 10 695 1 M4 x 6 cheese head screw |
Thanks!! _________________ 1971 1302LS Convertible (RHD) owned since '74
Click to view image
1965 Karmann Ghia Coupe - under restoration
1966 Fiat 1500 Cabrio (with 1600 Twin cam)
1952 Citroen TA 11BL |
|
Back to top |
|
|
|