Author |
Message |
bearwin Samba Member
Joined: December 16, 2004 Posts: 284 Location: san diego,california
|
Posted: Thu Dec 17, 2020 4:37 am Post subject: wide 5 BRMs with adapters ( 4x130 to 5x205) |
|
|
hello guys, i just want to inquire if my 68 std bug (4 lugs) can run the wide 5 BRMs using the 4 lug to wide 5 lug wheel adapters, my concern is, will the bolts on the 4x130 part clear the back side of brms? adapter bolts won't hit the rim?
thank you |
|
Back to top |
|
|
DerrickfromNC1 Samba Member
Joined: October 24, 2008 Posts: 1300 Location: North Carolina
|
Posted: Thu Dec 17, 2020 9:55 am Post subject: Re: wide 5 BRMs with adapters ( 4x130 to 5x205) |
|
|
I have the 4 bolt to wide 5 adapters with 17” BRMs....no interference problems.
However you may have a problem with your tires contacting your fenders since those adapters will push your wheel/tires out about 1/2”. |
|
Back to top |
|
|
Pacblue63 Samba Member
Joined: January 23, 2011 Posts: 85
|
Posted: Sun Jan 17, 2021 2:38 am Post subject: Re: wide 5 BRMs with adapters ( 4x130 to 5x205) |
|
|
DerrickfromNC1 wrote: |
I have the 4 bolt to wide 5 adapters with 17” BRMs....no interference problems.
However you may have a problem with your tires contacting your fenders since those adapters will push your wheel/tires out about 1/2”. |
Did u use steel 4lug to 5x205 adapters
Also what lugnuts did u use to bolt up adapter on 4Lug holes
Thanks |
|
Back to top |
|
|
DerrickfromNC1 Samba Member
Joined: October 24, 2008 Posts: 1300 Location: North Carolina
|
Posted: Sun Jan 17, 2021 5:04 pm Post subject: Re: wide 5 BRMs with adapters ( 4x130 to 5x205) |
|
|
Yes 4 to 5 lug adapter. Used the 14mm screw in studs to bolt adapter to disc/drum. Used 12mm screw in studs for wheel to adapter. All items from CBPerf. |
|
Back to top |
|
|
Pacblue63 Samba Member
Joined: January 23, 2011 Posts: 85
|
Posted: Mon Jan 18, 2021 11:35 am Post subject: Re: wide 5 BRMs with adapters ( 4x130 to 5x205) |
|
|
DerrickfromNC1 wrote: |
Yes 4 to 5 lug adapter. Used the 14mm screw in studs to bolt adapter to disc/drum. Used 12mm screw in studs for wheel to adapter. All items from CBPerf. |
Did u use spacer for front to clear caliper
Will use 17x7 empi raider wheels on vw bug
Thank you |
|
Back to top |
|
|
DerrickfromNC1 Samba Member
Joined: October 24, 2008 Posts: 1300 Location: North Carolina
|
Posted: Tue Jan 19, 2021 3:33 pm Post subject: Re: wide 5 BRMs with adapters ( 4x130 to 5x205) |
|
|
Used a 3/8” spacer to gain clearance between the spacer and caliper. |
|
Back to top |
|
|
Pacblue63 Samba Member
Joined: January 23, 2011 Posts: 85
|
Posted: Tue Jan 19, 2021 7:26 pm Post subject: Re: wide 5 BRMs with adapters ( 4x130 to 5x205) |
|
|
DerrickfromNC1 wrote: |
Used a 3/8” spacer to gain clearance between the spacer and caliper. |
Nice same setup planning to use
Thanks for reply |
|
Back to top |
|
|
Pacblue63 Samba Member
Joined: January 23, 2011 Posts: 85
|
Posted: Mon Jul 19, 2021 4:41 pm Post subject: Re: wide 5 BRMs with adapters ( 4x130 to 5x205) |
|
|
DerrickfromNC1 wrote: |
Used a 3/8” spacer to gain clearance between the spacer and caliper. |
Have a pic of rear setup?adapters bolted |
|
Back to top |
|
|
DerrickfromNC1 Samba Member
Joined: October 24, 2008 Posts: 1300 Location: North Carolina
|
Posted: Tue Jul 20, 2021 11:11 am Post subject: Re: wide 5 BRMs with adapters ( 4x130 to 5x205) |
|
|
Pacblue63 wrote: |
DerrickfromNC1 wrote: |
Used a 3/8” spacer to gain clearance between the spacer and caliper. |
Have a pic of rear setup?adapters bolted |
Basically same setup as front except on drums minus the 3/8” spacer under the adapter. |
|
Back to top |
|
|
Pacblue63 Samba Member
Joined: January 23, 2011 Posts: 85
|
Posted: Tue Jul 20, 2021 11:23 pm Post subject: Re: wide 5 BRMs with adapters ( 4x130 to 5x205) |
|
|
DerrickfromNC1 wrote: |
Pacblue63 wrote: |
DerrickfromNC1 wrote: |
Used a 3/8” spacer to gain clearance between the spacer and caliper. |
Have a pic of rear setup?adapters bolted |
Basically same setup as front except on drums minus the 3/8” spacer under the adapter. |
Kool thank u |
|
Back to top |
|
|
|