Author |
Message |
EBSTEVE Samba Member
Joined: September 11, 2005 Posts: 112 Location: Snohomish wa
|
Posted: Wed Mar 10, 2021 7:12 pm Post subject: Trunk seal installation |
|
|
I'm trying to install the trunk seal on the 54 I'm building my wife and the seal is kicking my butt. It's a Wolfsburg West seal and I can not get it to go with silicone spray and a plastic door tool.
Are there any tricks that may help or is there another supplier that makes one that fits better (maybe smaller)? I assume the WW seal would be factory size but I'm running out of ideas and I don't want to screw up the paint.
Thanks for any ideas / help out just sympathy if it's really this bad 😅 |
|
Back to top |
|
|
Dan22 Samba Member
Joined: August 30, 2019 Posts: 469 Location: Battle Ground, WA
|
|
Back to top |
|
|
piet&som Samba Member
Joined: February 18, 2009 Posts: 250 Location: Toxandria
|
Posted: Thu Mar 11, 2021 2:29 am Post subject: Re: Trunk seal installation |
|
|
Stretching sometimes helpes but if the diameter is too thick it will give trouble.
Original it's 3 mm, lots of aftermarket seals are 4 mm or even thicker. That makes it very hard to slide in even with baby powder or lubrication. _________________ Oval 54 Light Beige, Oval 53 Metalblue. |
|
Back to top |
|
|
aa390392 Samba Member
Joined: March 28, 2007 Posts: 3602 Location: So.Cal
|
Posted: Thu Mar 11, 2021 10:29 am Post subject: Re: Trunk seal installation |
|
|
Not sure, but at 1 time someone made a tool to help ya along when installing the seal.
Sorry I dont have a link. Anyone?
Tomas _________________ .
getting grumpy & less tolerant!
55 ragtop
56 delux sedan
56 Kabriolet |
|
Back to top |
|
|
Dan22 Samba Member
Joined: August 30, 2019 Posts: 469 Location: Battle Ground, WA
|
Posted: Thu Mar 11, 2021 10:37 am Post subject: Re: Trunk seal installation |
|
|
I bought some of WW C channels and they are not good either. Shape is not C shape but rather U shape so it does not capture the seal. Needs to be crimped down to work. The originals were C shaped.
Just not all good repops out there I guess. Old ones I bought like 40 years ago were too small and loose in the groove.
Wonder how WCM seals are? _________________ 1-0900722 die langsame grüne Schildkröte
https://www.thesamba.com/vw/forum/viewtopic.php?t=765074 |
|
Back to top |
|
|
|