Author |
Message |
Ajmarqueling Samba Member
Joined: December 19, 2018 Posts: 16 Location: IN
|
Posted: Fri Dec 21, 2018 1:14 pm Post subject: Re: Brake line flaring |
|
|
jammor wrote: |
I just used The POWERBUILT 9 piece double flaring tool kit from Advance Auto Parts
Kit # 23 model 648610
$36- returnable loaner tool
Used the 3/16ths die (correct word?) on 3/16th teflon coated line (Advance Auto).
Use OIL to help die not "stick". You will use ALOT of torque on the Poly-Armour steel line
Poly-Armour Poly-Armour PVF Steel Brake Line Tubing Coil, 3/16" x 25'
4.0 star rated product | #PAC-325
$21.99-
I broke the first die thing off inside the brake line because Advance also sells a cheaper Flare kit (if you can believe that)-
If I had it to do over I'd just spend the $35 on a line kit-- Didn't want to wait on shipping
Airkewld STEEL BRAKE LINE KIT - 4860
BUT the flares I made work and don't leak! |
so is this a double flare kit that you made bubble flares with as the OP stated? Or is this kit a bubble flare kit? |
|
Back to top |
|
|
elikus Samba Member
Joined: November 12, 2008 Posts: 22
|
Posted: Thu Apr 08, 2021 11:07 am Post subject: Re: Brake line flaring |
|
|
I'm confused, is it Bubble flare for all Type-1? The Service manual from Bentley, 1966-1969, page 12 of the brakes section indicates that the tubes ends are "double flared", as shown in Fig. 18.
I'm in the process of replacing my lines on my 66, and I'm looking for clarification on this, rather than asking in a new post.
Thanks in advance. |
|
Back to top |
|
|
Hotrodvw Samba Member
Joined: July 06, 2004 Posts: 6327 Location: Orygun
|
Posted: Thu Apr 08, 2021 1:25 pm Post subject: Re: Brake line flaring |
|
|
A double flare is inverted because it's double lapped, not a bubble DIN flare. What will dictate the type of flare to be used is the receiving port. If using OEM style parts on your '66, you'll be using a DIN bubble flare. _________________ '67 Sunroof
Eric
78x94 with IDA's....oober fun
Horsepower is an addiction........Addictions cost
lots of money!
Hose & Fittings |
|
Back to top |
|
|
|