Stock cylinder heads look okay? See any problems?

[atomicmime]

I've got a pair of heads that came as extra parts with another project, and I want to be sure they are in good shape and without any issues before I post them here in the ads on Samba. I examined very carefully after just a little cleaning, and I see no cracks or other problems, but I'm far from being an expert diagnostician. Stock German dual port heads, right?
113 101 375 A is for a Type 1; 311 101 375 is Type 3, but they can be used as a pair according to threads I read here in the forums.
Any issues you can see? Thanks very much for your help and responses!

_________________
---------------------------------
--Patrick--
'69 Meyers Manx (still a project, but not for long!)
'72 Westy
'79 Super Beetle (now electric!)
'13 Beetle

[dunk]

they look a bit.... hemi cut to me...

[evanfrucht]

Ya I also think they look hemi cut. Maybe good for turbo use?

Measure the CC volume, might make them easier to sell

Can't see any damage, but then again most damage will not be detectable from a photo.
_________________
1967 Bug ( the daily rod )
1964 Fury Wagon ( the pavement shredder )

[atomicmime]

Thanks so much for the responses! Is there an easy way to check the cc volume? If hemi cut heads are used with stock barrels, would it mean just a slight increase in displacement size?
_________________
---------------------------------
--Patrick--
'69 Meyers Manx (still a project, but not for long!)
'72 Westy
'79 Super Beetle (now electric!)
'13 Beetle

[GARRICK.CLARK]

Check the plug threads
And check the valve guides for ware