Author |
Message |
mondshine Samba Member
Joined: October 27, 2006 Posts: 2769 Location: The World's Motor Capital
|
|
Back to top |
|
|
Serpent7 Samba Member
Joined: May 26, 2008 Posts: 410 Location: Temple Hills, MD.
|
Posted: Tue Feb 02, 2021 10:10 am Post subject: Re: Dual Brake Circuit Warning Lamp |
|
|
Thanks! _________________ 2019 Audi Q5
2014 Volkswagen Touareg X
1997 Honda Shadow
1979 Kawasaki KZ1000
1979 Volkswagen Transporter
1973 Volkswagen Thing |
|
Back to top |
|
|
Dougster43 Samba Member
Joined: May 11, 2018 Posts: 183 Location: Texas
|
Posted: Sat May 08, 2021 6:29 pm Post subject: Re: Dual Brake Circuit Warning Lamp |
|
|
Just got my 73 back running today and I am having an odd brake circuit warning light operation. I read the Captains explanation (which is great), but it doesn't explain my issue.
When I turn the ignition on, the brake warning light turns on as it should for a bulb check. The generator light also turns on as expected. Then when I start the car, the generator light turns off, but the brake warning light stays on. It remains on indefinitely except when I push the brake pedal - it turns off for as long as I have the brake pedal pushed, and then it turns back on when I take my foot off of the brakes.
Has anyone ever had an issue like that or have any idea of what might be causing the issue? |
|
Back to top |
|
|
Semper_Dad Samba Member
Joined: May 14, 2005 Posts: 3509 Location: Indiana
|
Posted: Sat May 08, 2021 7:39 pm Post subject: Re: Dual Brake Circuit Warning Lamp |
|
|
Transistor in indicator faulty _________________ Walküre Restoration Thread: https://www.thesamba.com/vw/forum/viewtopic.php?t=737492
Last edited by Semper_Dad on Sat May 08, 2021 7:47 pm; edited 1 time in total |
|
Back to top |
|
|
Gene Kisner Samba Member
Joined: September 02, 2012 Posts: 80 Location: Fairmont, West Virginia
|
Posted: Sat May 08, 2021 7:43 pm Post subject: Re: Dual Brake Circuit Warning Lamp |
|
|
Simple fix. The warning light is defective. Replace it. |
|
Back to top |
|
|
Dougster43 Samba Member
Joined: May 11, 2018 Posts: 183 Location: Texas
|
Posted: Sun May 09, 2021 5:15 pm Post subject: Re: Dual Brake Circuit Warning Lamp |
|
|
Ok I figured out the issue, was operator error!!
Turns out I had the wires swapped on terminals K and 61 on the warning light (dang small terminal numbers...) . Landed the wires properly and the light works perfectly. Still chasing through the wiring but so far that's my only blunder. |
|
Back to top |
|
|
|