Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Camper interior build on a 64 Kombi
Page: Previous  1, 2, 3 ... 24, 25, 26, 27  Next
Jump to:
Forum Index -> Split Bus Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Author Message
BarryL Premium Member
Samba Member


Joined: November 01, 2004
Posts: 14218
Location: Casa de Oro, California
BarryL is offline 

PostPosted: Thu Apr 22, 2021 6:17 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

A heater repair guy once told me Porsche parts places can build the pipe and supply the hose or build the hose. Although not the correct piece here is an example: https://www.stoddard.com/90111004103.html from this page: https://www.stoddard.com/catalogsearch/result/?q=fuel+line
Back to top
View user's profile Send private message Gallery Classifieds Feedback
sgellis
Samba Member


Joined: July 06, 2016
Posts: 2002
Location: SW Nova Scotia, Canada
sgellis is offline 

PostPosted: Sat May 01, 2021 3:08 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

Got the bus out of storage today.

Mounted the table under bench. Fits perfect and doesn't rattle. Very happy.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

_________________
My 64 Kombi restoration
My camper interior build
My 54 standard restoration
The Nova Scotian Barndoor (YouTube)
The Nova Scotian Barndoor (CAD drawings)
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
sgellis
Samba Member


Joined: July 06, 2016
Posts: 2002
Location: SW Nova Scotia, Canada
sgellis is offline 

PostPosted: Sun May 02, 2021 12:19 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

New side light lens printed. Very happy with this one.

Used a new filament. A clear PETG from Polymaker. looks great and prints nice. Light lens is clear but LED is warm so gives it a nice yellow look when on. Walls are one layer thick. The pattern is from the 15% gyroid infill and I quite like the effect. Didn't think it would look that good.

The lights have 4 levels of brightness. Each tap goes up a level and holding switch shuts it off so at night we can give it one press for dim light and press and hold to turn off.

Now printing second and eagerly waiting for dark to see how they look. Smile

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

_________________
My 64 Kombi restoration
My camper interior build
My 54 standard restoration
The Nova Scotian Barndoor (YouTube)
The Nova Scotian Barndoor (CAD drawings)
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
PDX db
Samba Member


Joined: March 14, 2013
Posts: 206

PDX db is offline 

PostPosted: Mon May 03, 2021 12:51 am    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

Love the sconces! Do you plan to offer them?
Back to top
View user's profile Send private message Gallery Classifieds Feedback
sgellis
Samba Member


Joined: July 06, 2016
Posts: 2002
Location: SW Nova Scotia, Canada
sgellis is offline 

PostPosted: Mon May 03, 2021 5:59 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

Second one in and got to see how they are at night. Love them. They do a good job of defusing the light but doesn't show well in the photos. On lowest they just have enough light to see.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

_________________
My 64 Kombi restoration
My camper interior build
My 54 standard restoration
The Nova Scotian Barndoor (YouTube)
The Nova Scotian Barndoor (CAD drawings)
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
sgellis
Samba Member


Joined: July 06, 2016
Posts: 2002
Location: SW Nova Scotia, Canada
sgellis is offline 

PostPosted: Mon May 03, 2021 6:13 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

PDX db wrote:
Love the sconces! Do you plan to offer them?


Thanks and no. I could probably be convinced to print the lens though if someone wanted a pair. I will add the final drawings here encase anyone wants to try making some.
_________________
My 64 Kombi restoration
My camper interior build
My 54 standard restoration
The Nova Scotian Barndoor (YouTube)
The Nova Scotian Barndoor (CAD drawings)
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
j.pickens
Samba Member


Joined: December 03, 2002
Posts: 9787
Location: Exit 7, New Jersey
j.pickens is offline 

PostPosted: Mon May 03, 2021 9:24 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

Image may have been reduced in size. Click image to view fullscreen.

Outstanding!
They look perfect.
_________________
Founder and Chairman Emeritus, ECMSAS
BBX BBXII and BBXXI Long Distance Award Winner
BeaterBarndoor wrote:

i wish more people would actually drive their vws rather than just talking about what they have in the garage.

Red Fau Veh wrote:
If you've seen one sunroof swivel seat kombi, you've seen them all! Cool
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
sgellis
Samba Member


Joined: July 06, 2016
Posts: 2002
Location: SW Nova Scotia, Canada
sgellis is offline 

PostPosted: Tue May 04, 2021 3:52 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

Plans for side lights if someone wants to build some.

Edit: Adding some earlier information
https://www.thesamba.com/vw/forum/viewtopic.php?t=...;start=396

Bit where I assemble the light holder
https://www.thesamba.com/vw/forum/viewtopic.php?t=...;start=416

CAD model https://a360.co/3xOLIYj

PDF
https://dl.dropboxusercontent.com/s/2jopzkmc1oardn9/SideLight.pdf
Image may have been reduced in size. Click image to view fullscreen.

_________________
My 64 Kombi restoration
My camper interior build
My 54 standard restoration
The Nova Scotian Barndoor (YouTube)
The Nova Scotian Barndoor (CAD drawings)
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
sgellis
Samba Member


Joined: July 06, 2016
Posts: 2002
Location: SW Nova Scotia, Canada
sgellis is offline 

PostPosted: Thu May 13, 2021 7:46 am    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

Printed some custom escutcheons. The wood door panels did not like to be spaced out at handle so made some thicker escutcheons. I didn't have good originals anyway. Also printed a thinner one for the rear door

Cream color is too light. I may try amber shellac on one to see what happens.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

_________________
My 64 Kombi restoration
My camper interior build
My 54 standard restoration
The Nova Scotian Barndoor (YouTube)
The Nova Scotian Barndoor (CAD drawings)
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
sgellis
Samba Member


Joined: July 06, 2016
Posts: 2002
Location: SW Nova Scotia, Canada
sgellis is offline 

PostPosted: Sat May 15, 2021 1:32 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

Cleaned the inside today so got a few photos


Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

_________________
My 64 Kombi restoration
My camper interior build
My 54 standard restoration
The Nova Scotian Barndoor (YouTube)
The Nova Scotian Barndoor (CAD drawings)
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
SplitBusVanatic
Samba Member


Joined: August 16, 2005
Posts: 338
Location: Co. Mayo. Ireland
SplitBusVanatic is offline 

PostPosted: Sun May 16, 2021 1:08 am    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

Gosh. That’s beautiful. It’s a credit to you. Well done.
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
panel
Samba Member


Joined: December 02, 2001
Posts: 1090
Location: Victoria B.C. Canada
panel is offline 

PostPosted: Sun May 16, 2021 12:36 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

I see a steering wheel restoration by you this winter , yes ?
_________________
My '65-Subaru EJ20 Turbo conversion
Back to top
View user's profile Send private message Send e-mail Visit poster's website Instagram Gallery Classifieds Feedback
sgellis
Samba Member


Joined: July 06, 2016
Posts: 2002
Location: SW Nova Scotia, Canada
sgellis is offline 

PostPosted: Sun May 16, 2021 2:07 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

panel wrote:
I see a steering wheel restoration by you this winter , yes ?


Actually I like the old look. Gives it a bit of contrast and look of age. I like the feel driving with it also so I will keep it like it is. The center came with the bus and I like the look so kept it even though I have the correct black one.
_________________
My 64 Kombi restoration
My camper interior build
My 54 standard restoration
The Nova Scotian Barndoor (YouTube)
The Nova Scotian Barndoor (CAD drawings)
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
mandraks
Samba Member


Joined: November 28, 2004
Posts: 7045
Location: Lawrenceville, Ga
mandraks is offline 

PostPosted: Sun May 16, 2021 2:08 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

sgellis wrote:
panel wrote:
I see a steering wheel restoration by you this winter , yes ?


Actually I like the old look. Gives it a bit of contrast and look of age. I like the feel driving with it also so I will keep it like it is. The center came with the bus and I like the look so kept it even though I have the correct black one.


totally with you. this is history you can touch every time you drive.
_________________
regards

Uli

----------------------------------------
'53 3-Fold Oval, L35 Metallic Blue, looking for a narrow hatch panel
Back to top
View user's profile Send private message Gallery Classifieds Feedback
panel
Samba Member


Joined: December 02, 2001
Posts: 1090
Location: Victoria B.C. Canada
panel is offline 

PostPosted: Sun May 16, 2021 5:14 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

Wink kinda like an old pair of slippers !
_________________
My '65-Subaru EJ20 Turbo conversion
Back to top
View user's profile Send private message Send e-mail Visit poster's website Instagram Gallery Classifieds Feedback
sgellis
Samba Member


Joined: July 06, 2016
Posts: 2002
Location: SW Nova Scotia, Canada
sgellis is offline 

PostPosted: Sun May 16, 2021 5:34 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

Only cracked at ends of arms. Rest is just nicely aged. Smile

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

_________________
My 64 Kombi restoration
My camper interior build
My 54 standard restoration
The Nova Scotian Barndoor (YouTube)
The Nova Scotian Barndoor (CAD drawings)
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
RalphWiggam
Samba Member


Joined: February 02, 2018
Posts: 906
Location: SouthEast
RalphWiggam is offline 

PostPosted: Sun May 16, 2021 5:37 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

Damn thats a nice bus man. Good work.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
sgellis
Samba Member


Joined: July 06, 2016
Posts: 2002
Location: SW Nova Scotia, Canada
sgellis is offline 

PostPosted: Wed May 19, 2021 4:01 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

I put two coats of amber shellac on the escutcheons. Improved them but think another coat may be better. I am planning to get some "wood" filament and will print some new ones and see if they are better

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

_________________
My 64 Kombi restoration
My camper interior build
My 54 standard restoration
The Nova Scotian Barndoor (YouTube)
The Nova Scotian Barndoor (CAD drawings)
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
peecee69
Samba Member


Joined: January 27, 2005
Posts: 1572
Location: Annapolis, MD/Bloomfield Hills, MI
peecee69 is offline 

PostPosted: Wed May 19, 2021 4:03 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

They look really nice! Did you carve them, or are they available from some seller?
_________________
1973 Standard Beetle - running maintenance thread - https://www.thesamba.com/vw/forum/viewtopic.php?t=675712&highlight=
1966 Doublecab - Starting resto - https://www.thesamba.com/vw/forum/viewtopic.php?t=668518&highlight=
Back to top
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger Facebook Gallery Classifieds Feedback
sgellis
Samba Member


Joined: July 06, 2016
Posts: 2002
Location: SW Nova Scotia, Canada
sgellis is offline 

PostPosted: Wed May 19, 2021 4:27 pm    Post subject: Re: Camper interior build on a 64 Kombi Reply with quote

peecee69 wrote:
They look really nice! Did you carve them, or are they available from some seller?


Made them with a 3D printer. Front ones are a little thicker than original.
_________________
My 64 Kombi restoration
My camper interior build
My 54 standard restoration
The Nova Scotian Barndoor (YouTube)
The Nova Scotian Barndoor (CAD drawings)
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> Split Bus All times are Mountain Standard Time/Pacific Daylight Savings Time
Page: Previous  1, 2, 3 ... 24, 25, 26, 27  Next
Jump to:
Page 25 of 27

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2023, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB
Links to eBay or other vendor sites may be affiliate links where the site receives compensation.