Author |
Message |
56cpe Samba Member
Joined: November 13, 2005 Posts: 198 Location: Western Australia
|
Posted: Mon May 17, 2021 10:02 pm Post subject: Dash Tops |
|
|
Wondering if I could get some feedback on the correct Dash Top for all years KG.
I have been through the 21 pages of the Idiots Guide to Interiors, lots of pictures but no real discussion on correct dash tops. I have looked at several Vendors and there are differences between them. I brought this topic up because a Client asked me for a Dash top for 68-69 but it has large cut out air vents - just like 72-74???. Any help would be appreciated so that we can get some concensus on what is correct, by date would be good.
We make the 59-60 Ribbed dash top for both LH and RHD
The Plastic Speaker Grill is sold for 56-65; that should read 55-65?
The Grab handle is Aluminum for 56-60, Plastic for 61-67 and cast indent 68-74
Its the size of the air vent that I find hard to determine especially around 68-71 as I have found Vendors with small slits and even cutouts like 71-74, Pictures are not always reliable.
Regards Jerry KG Co Australia |
|
Back to top |
|
|
Braukuche Samba Member
Joined: September 03, 2004 Posts: 10999
|
Posted: Tue May 18, 2021 11:38 am Post subject: Re: Dash Tops |
|
|
56cpe wrote: |
Wondering if I could get some feedback on the correct Dash Top for all years KG.
I have been through the 21 pages of the Idiots Guide to Interiors, lots of pictures but no real discussion on correct dash tops. I have looked at several Vendors and there are differences between them. I brought this topic up because a Client asked me for a Dash top for 68-69 but it has large cut out air vents - just like 72-74???. Any help would be appreciated so that we can get some concensus on what is correct, by date would be good.
We make the 59-60 Ribbed dash top for both LH and RHD
The Plastic Speaker Grill is sold for 56-65; that should read 55-65?
The Grab handle is Aluminum for 56-60, Plastic for 61-67 and cast indent 68-74
Its the size of the air vent that I find hard to determine especially around 68-71 as I have found Vendors with small slits and even cutouts like 71-74, Pictures are not always reliable.
Regards Jerry KG Co Australia |
I just went through this. 68-69 has 6” vents 70 has 7”, 71-74 the big vents. Dashes direct makes a correct size vents dash pad, Airhead suggest using a 68-69 dash and trimming the vents or leave it be and cover up the extra inch.
I bought the dashes direct one which is floppy urethane I think but at least it fits right on my 70. _________________ Go Reds! Smash state!
Retirement is here!
1956 Ghia
1959 SO-23 Westfalia
1960 double cab
1960 Baja Bug
1963 stretched double cab
1962 Golde sunroof Ghia
1963 356 B coupe
1963 Notchback
1967 21 window less rusty now |
|
Back to top |
|
|
56cpe Samba Member
Joined: November 13, 2005 Posts: 198 Location: Western Australia
|
Posted: Thu May 20, 2021 12:09 am Post subject: Re: Dash Tops |
|
|
Thanks Dan - question answered
Regards Jerry |
|
Back to top |
|
|
|