Author |
Message |
danfromsyr Samba Member
Joined: March 01, 2004 Posts: 15144 Location: Syracuse, NY
|
Posted: Wed Mar 21, 2018 8:15 am Post subject: Re: My project Syncro |
|
|
that is/was/ is the stupidest place to put any electronics in a car..
and VW has been doing it for decades.
with the AEB you don't need any wires past the ECU at the firewall/raintray.
I've taken AEB harness out in the junkyard in my dress shirt..
but if you need a CCM to make the car move.. let me know(PM) I'll look in our bin. _________________
Abscate wrote: |
These are the reasons we have words like “wanker” |
|
|
Back to top |
|
|
buspor63 Samba Member
Joined: February 17, 2005 Posts: 1179 Location: Knoxville,TN Where America stops for gas
|
Posted: Thu Mar 22, 2018 2:22 pm Post subject: Re: My project Syncro |
|
|
danfromsyr wrote: |
if you need a CCM to make the car move.. let me know(PM) I'll look in our bin. |
Thanks Dan, I was just about to PM you. I've bought one off of the net, hope it works for me, same P/N number. Glad to hear it's not needed for the conversion too.
Junkie, I thought about that, but the weather turned bad here, well, for the south at least. I'll keep trying though.
Long term project, I'm looking forward to collecting parts _________________ Imagine that, theres not an "h" in either Westfalia or Syncro? |
|
Back to top |
|
|
ALstew Samba Member
Joined: November 11, 2016 Posts: 176 Location: SoCal
|
Posted: Thu Jun 21, 2018 10:37 pm Post subject: Re: My project Syncro |
|
|
sub'd |
|
Back to top |
|
|
Multiman mv Samba Member
Joined: January 24, 2017 Posts: 987 Location: Martha's Vineyard, Ma
|
Posted: Fri Jun 22, 2018 3:21 am Post subject: Re: My project Syncro |
|
|
Sounds like a great project you’re getting yourself into. Looking forward to following your progress. Good luck and have fun! |
|
Back to top |
|
|
buspor63 Samba Member
Joined: February 17, 2005 Posts: 1179 Location: Knoxville,TN Where America stops for gas
|
Posted: Sun Jan 24, 2021 7:52 pm Post subject: Re: My project Syncro |
|
|
Wow, it looks like I've abandoned this thread...... Life always gets in the way. I did shift some focus/energy to my '84 Westy, it had been off of the road since 2015. Still running the original 2.1 WBX, but haven't been using it very much. In the fall of ..... 2019..... I took it to a couple of bike races and festivals. I made sure to take pictures, a few more to come too.
_________________ Imagine that, theres not an "h" in either Westfalia or Syncro? |
|
Back to top |
|
|
buspor63 Samba Member
Joined: February 17, 2005 Posts: 1179 Location: Knoxville,TN Where America stops for gas
|
Posted: Sat Jun 12, 2021 7:32 am Post subject: Re: My project Syncro |
|
|
My Syncro hasn’t been getting used or worked on since I’ve been focusing on the 1984 Westfalia.
We always worry about mice getting in and chewing up upholstery, wiring and fuel lines. Although it was a shock to see, somewhat comforting knowing there’s a snake there.
_________________ Imagine that, theres not an "h" in either Westfalia or Syncro? |
|
Back to top |
|
|
WestyWanter Samba Member
Joined: February 15, 2017 Posts: 459 Location: San Diego
|
Posted: Sat Jun 12, 2021 7:45 am Post subject: Re: My project Syncro |
|
|
buspor63 wrote: |
My Syncro hasn’t been getting used or worked on since I’ve been focusing on the 1984 Westfalia.
We always worry about mice getting in and chewing up upholstery, wiring and fuel lines. Although it was a shock to see, somewhat comforting knowing there’s a snake there.
|
Thats one way to keep mice out of the electrical system! |
|
Back to top |
|
|
buspor63 Samba Member
Joined: February 17, 2005 Posts: 1179 Location: Knoxville,TN Where America stops for gas
|
Posted: Tue Sep 06, 2022 6:24 pm Post subject: Re: My project Syncro |
|
|
I've finally started to renovate the Syncro. Sometime back, I pulled the engine. It's up on the stand and I've started to tear it down.
_________________ Imagine that, theres not an "h" in either Westfalia or Syncro? |
|
Back to top |
|
|
TopBud Samba Member
Joined: February 28, 2004 Posts: 1111 Location: Flagstaff AZ
|
Posted: Tue Sep 06, 2022 7:03 pm Post subject: Re: My project Syncro |
|
|
buspor63- do you have more pics of the rear bike rack? Looks pretty custom.
Do you have any more info on that? Thanks _________________ 86 bostig SYNCRO
66 convertible Karmann Ghia |
|
Back to top |
|
|
buspor63 Samba Member
Joined: February 17, 2005 Posts: 1179 Location: Knoxville,TN Where America stops for gas
|
Posted: Wed Sep 07, 2022 10:57 pm Post subject: Re: My project Syncro |
|
|
TopBud wrote: |
buspor63- do you have more pics of the rear bike rack? Looks pretty custom.
|
Not really. I built it out of plywood just as I needed. It bolted to a cargo carrier. Lasted several years, served it's purpose. _________________ Imagine that, theres not an "h" in either Westfalia or Syncro? |
|
Back to top |
|
|
TopBud Samba Member
Joined: February 28, 2004 Posts: 1111 Location: Flagstaff AZ
|
Posted: Thu Sep 08, 2022 10:50 am Post subject: Re: My project Syncro |
|
|
Awesome. Thank you. Always looking for bike rack ideas. _________________ 86 bostig SYNCRO
66 convertible Karmann Ghia |
|
Back to top |
|
|
buspor63 Samba Member
Joined: February 17, 2005 Posts: 1179 Location: Knoxville,TN Where America stops for gas
|
Posted: Fri Sep 16, 2022 5:59 am Post subject: Re: My project Syncro |
|
|
Some progress has been made. Heads off, pistons removed. I'm not splitting the case or removing the rods, this is just a reseal to get 5K-!0K more miles.
The head seals both had several of these cracks. The head sealing surface didn't look too bad.
We all love this, right?
A slide hammer works well.
I welded a bolt onto a hammer accessory so a nut could thread on. The nut is just smaller than the C clip. _________________ Imagine that, theres not an "h" in either Westfalia or Syncro? |
|
Back to top |
|
|
uberaudi Samba Member
Joined: June 24, 2013 Posts: 503 Location: Hi-top Country
|
Posted: Fri Sep 16, 2022 8:15 pm Post subject: Re: My project Syncro |
|
|
Nice progress! Which wheels are those? Audi 16's? Did you have to bore them out? _________________ '84 Adventurewagen 1Z Tdi, '89 Tintop ABA, and a 86 Syncro tintop WBX. |
|
Back to top |
|
|
buspor63 Samba Member
Joined: February 17, 2005 Posts: 1179 Location: Knoxville,TN Where America stops for gas
|
Posted: Sat Sep 17, 2022 3:53 pm Post subject: Re: My project Syncro |
|
|
uberaudi wrote: |
Nice progress! Which wheels are those? Audi 16's? Did you have to bore them out? |
Yes, Audi and I used a router with a carbide bit to open then up. They are the ones with a 37ET. I've had a hard time locating more, I did find ones with the 47ET. Bought them anyway for another Vanagon. _________________ Imagine that, theres not an "h" in either Westfalia or Syncro? |
|
Back to top |
|
|
uberaudi Samba Member
Joined: June 24, 2013 Posts: 503 Location: Hi-top Country
|
Posted: Sat Sep 17, 2022 7:57 pm Post subject: Re: My project Syncro |
|
|
That's funny, I have a set of these Audi wheels but haven't been able to find any info on what they came off of. 16" et35. I was looking for a spare and had no luck, otherwise they'd already be on my Syncro. Gtk that they require boring out the center.
_________________ '84 Adventurewagen 1Z Tdi, '89 Tintop ABA, and a 86 Syncro tintop WBX. |
|
Back to top |
|
|
ALIKA T3 Samba Member
Joined: July 30, 2009 Posts: 6361 Location: Honolulu,Hawaii and France
|
Posted: Sat Sep 17, 2022 8:56 pm Post subject: Re: My project Syncro |
|
|
uberaudi wrote: |
That's funny, I have a set of these Audi wheels but haven't been able to find any info on what they came off of. 16" et35. I was looking for a spare and had no luck, otherwise they'd already be on my Syncro. Gtk that they require boring out the center.
|
There should be a part number cast in the back. _________________ Silicone Steering Boots and 930 Cv boots for sale in the classifieds.
Syncro transmission upgrade parts in the Classifieds.
Subaru EJ22+UN1 5 speed transmission
http://www.thesamba.com/vw/forum/viewtopic.php?t=416343
Syncro http://www.thesamba.com/vw/forum/viewtopic.php?t=4...num+gadget |
|
Back to top |
|
|
|