Author |
Message |
gschwell Samba Member
Joined: August 19, 2010 Posts: 25 Location: South Hadley, MA
|
Posted: Thu Jun 10, 2021 5:35 am Post subject: Pop top swap |
|
|
Is it possible to put a westy fiberglass top on an EVC? My Winnie top has a few cracks. I’m thinking finding an old westy top might be possible, and cheaper than after market alternatives. |
|
Back to top |
|
|
dazey77 Samba Member
Joined: May 11, 2020 Posts: 163 Location: Other side of the pond.
|
Posted: Fri Jun 11, 2021 5:58 am Post subject: Re: Pop top swap |
|
|
With a bit of modification and effort I am sure you could get it to fit.
I take it you realise however that the two vehicles are different lenghts (LWB for EVC and SWB for the westy).
The westy I think goes further forwards in the first place (EVC finishes before the cab, doesn't the westy go all the way to the front?)
As the EVC is longer the westy one 'may' fit in a similar manner to how the EVC does now.
If you can find both vans then measure them up. . . _________________ My van modification blog:
www.dazedproductions.co.uk/Vanity |
|
Back to top |
|
|
orbeamike Samba Member
Joined: May 16, 2017 Posts: 150 Location: California
|
Posted: Sat Jun 12, 2021 12:06 pm Post subject: Re: Pop top swap |
|
|
gschwell wrote: |
Is it possible to put a westy fiberglass top on an EVC? My Winnie top has a few cracks. I’m thinking finding an old westy top might be possible, and cheaper than after market alternatives. |
Not possible because the Winnebago EVC is built on Long Wheel based vans and the weekenders are short wheel based. They are about a foot difference in length. There is one person in Canada that made an outer aluminum shell to replace the plastic outer shell. I worked with Santa Cruz campers and imported a LWB top and had it installed on my EVC.
|
|
Back to top |
|
|
|