Author |
Message |
SyncroHead Samba Member
Joined: May 23, 2005 Posts: 1145 Location: Northern Nevada
|
Posted: Fri Jun 18, 2021 3:10 pm Post subject: Re: Zerex Coolants |
|
|
I've copied some information from the Valvoline website comparing G-05, G-40, and G-48 approvals from the Valvoline Product Information Sheets.
Notice the two separate lists with the distinction of "an approved formula" vs. "formulated to meet or exceeds the following antifreeze specifications".
G-05 Approvals - No mention of any VW specification.
Valvoline ZEREX G05 Antifreeze Coolant is an approved formula for the following specifications:
Chrysler MS 9769
John Deere JDM H24
Cummins CES 14603
Ford North America WSS-M 97B51-A1
GE Wind Turbines
JCB STD00088
Mercedes-Benz before 2017
MTU MTL 5048
MAN List 3.3.7
MTU/DDC
Valvoline ZEREX G05 Antifreeze Coolant is formulated to meet or exceeds the following antifreeze specifications:
ASTM D3306
GM 1825M
ASTM D6210
Case New Holland
CAT EC-1
Detroit Diesel 7SE298
Federal Specification A-A-870A
GM 1899M
Mack
Navistar MPAPS B1 III
Paccar
Perkins Diesel
TMC of ATA RP-329B
G-40 approvals: - VW shown on BOTH lists:
Valvoline ZEREX G40 is an approved formula for the following specifications:
Audi TL 774 G
Bentley TL 774 G
Bugatti TL 774 G
Cummins CES 14603 Registered
Cummins CES 14439 Registered
DCC
Detroit Diesel DFS93K217ELC
DEUTZ DQC CC-14 Approved
DEUTZ DQC CA-14 Approved
Irizar (from 2016)
Lamborghini TL 774 G
Liebherr Minimum LH-01-COL3A
MB Approval 325.6
Mercedes Truck
Mercedes-Benz MB-Approval 325.5
MTU MTL 5048
Porsche (from 2010)
SCANIA
Seat TL 774 G
Škoda TL 774 G
Smart
MB-Approval 326.0
VW TL 774 G
MAN 324 Type Si-OAT
Valvoline ZEREX G40 is formulated to meet or exceed the following antifreeze specifications and/or is recommended:
ASTM D3306
ASTM D4985
ASTM D6210
Federal Specification A-A-870A
Navistar MPAPS B1 IIIA
SAE J1034
SAE J1941
SAE J814
VW TL-774J
G-48 approvals: - VW shown on just ONE LIST:
Valvoline ZEREX G48 Antifreeze Coolant is an approved formula for the following specifications:
Audi TL-774-C
BMW GS 94000
(Certain Ford & Chrysler)
Detroit Diesel 7SE298
DEUTZ DQC CA-14 Approved
Federal Specification A-A-870A
Jaguar
Jenbacher TA-Nr. 1000-0201
Liebherr Minimum LH-00-COL3A
MAN Diesel & Turbo Liste 3.3.7
MAN MAN 324 NF
Maybach MB-Approval 325.0
Mercedes-Benz 325.0 before 2017
Mini BMW GS 94000
MTU MTL 5048
Opel/Vauxhall (until 2000) B040 0240
Porsche (until 1995)
Rolls-Royce (from 1998)
BMW GS 94000
Saab 690 1599
Seat TL-774-C
Škoda TL-774-C
Smart MB-Approval 325.0
TMC of ATA RP-302B
Van Hool
Volvo 2015 (cars) and older
Volvo Truck
VW TL-774-C
Zastava
Valvoline ZEREX G48 Antifreeze Coolant is formulated to meet or exceed the following antifreeze specifications:
ASTM D3306
ASTM D4985
GM 1899M
GM 1825M
SAE J1034
SAE J814
SAE J1941
Tesla
Looks to me like G-40 is the most "VW friendly" variety of Zerex with Valvoline including the VW TL-774-C spec on both of their lists.
At least for current cars. I don't think car makers or antifreeze makers bother to go back to figure out which varieties are suited for 30 year old cars.
Jim Davis _________________ "A Vanagon? It's not a car or a van. It's a hobby!"
Check out:
www.VANAVATION.com
www.SyncroSafari.org and
www.Vanagons.org
sphet wrote: |
I have *no* idea what the previous owner carried in his Westy... angry donkeys? |
|
|
Back to top |
|
|
Zeitgeist 13 Samba Member
Joined: March 05, 2009 Posts: 12115 Location: Port Manteau
|
Posted: Fri Jun 18, 2021 11:48 pm Post subject: Re: Zerex Coolants |
|
|
G-05 was factory MB coolant back when the Vanagon was in production. It works just fine. But, then again just about any coolant will work just fine these days. This really isn't a big deal with the newest formulas. _________________ Casey--
'89 Bluestar ALH w/12mm Waldo pump, PP764 and GT2052
'01 Weekender --> full camper
y u rune klassik? |
|
Back to top |
|
|
|