Author |
Message |
Scruffy Buggy Samba Member
Joined: December 16, 2020 Posts: 28 Location: N. FL
|
Posted: Thu Dec 17, 2020 5:33 pm Post subject: 4x130 to 5x4.5 adapter. |
|
|
Anybody know a source for 4x130 to 5x4.5 adapters?
I found a set on eBay but they were double the cost of any other configuration.
I have a set of wheels off my Mustang I would like to put on my rail. |
|
Back to top |
|
|
NJ John Samba Member
Joined: September 21, 2007 Posts: 2218 Location: HdG, MD & NJ
|
Posted: Mon Dec 21, 2020 7:55 am Post subject: Re: 4x130 to 5x4.5 adapter. |
|
|
I saw some on FB marketplace yesterday. _________________ 1973 standard, yellow, lowered, 3” narrowed front, 1600 blo-thru turbo w/single dell 15.4@86, so far
11.41 et buggy. Long gone
Let’s go O’s! Let’s go O’s!
https://www.youtube.com/@AirSpooledGarage |
|
Back to top |
|
|
Chadabear Samba Member
Joined: August 10, 2018 Posts: 106 Location: LA
|
Posted: Thu Jan 14, 2021 9:46 am Post subject: Re: 4x130 to 5x4.5 adapter. |
|
|
Scruffy Buggy wrote: |
Anybody know a source for 4x130 to 5x4.5 adapters?
I found a set on eBay but they were double the cost of any other configuration.
I have a set of wheels off my Mustang I would like to put on my rail. |
Take your drums or spindles and have a machine shop re-drill them for that pattern. If you think it's something you could tackle, make a nice traceable pattern, and drill yourself. Then add knock in studs and lug nuts like standard autos use. Very simple transformation |
|
Back to top |
|
|
QRP Samba Member
Joined: April 27, 2008 Posts: 1710 Location: NORTH HOLLYWOOD,CA
|
Posted: Thu Jan 14, 2021 11:18 am Post subject: Re: 4x130 to 5x4.5 adapter. |
|
|
You're a retired machinist so it should be a very simple task.
Use an adapter from 4x130 to 5x4.5 as a fixture.
Or even better I'm sure you can find new drum or rotors already drilled for it.
|
|
Back to top |
|
|
NJ John Samba Member
Joined: September 21, 2007 Posts: 2218 Location: HdG, MD & NJ
|
|
Back to top |
|
|
|