transmission ground strap location(s)

[azbob]

I am helping a friend with her car and see that they used this puck style transmission mount. Before I break out the welder and weld a bolt onto the torsion, I figured I'd see what creative ways other people have done.

What would be the best easiest way to run the ground strap?

_________________
Bus Builder

[61SNRF]

You could use a M10 long hex barrel nut like the one in this link on one of the frame studs, then bolt the ground strap the the open side...

https://m.alibaba.com/amp/product/60732597700.html
_________________
-Bruce

An ounce of prevention is worth a pound of cure.

[Big Bill]

I have seen it done the way 61SNRF explained, it works very well that way.

[downsbs1]

[azbob]