Where does this spring go?

[bug1000000000]

As part of the fan belt exploding and engine getting hot on my 78 vert, I found this spring hanging unattached at one end. The 2nd photo shows my guess at the only place I could see it might attach to. I'm guessing it aids in the return of the accelerator. Thanks for your help!

[Cusser]

Picture 1: end of spring is broken off.
_________________
1970 VW (owned since 1972) and 1971 VW Convertible (owned since 1976), second owner of each. The '71 now has the 1835 engine, swapped from the '70. Second owner of each. 1988 Mazda B2200 truck, 1998 Frontier, 2014 Yukon, 2004 Frontier King Cab. All manual transmission except for the Yukon. http://www.thesamba.com/vw/forum/album_page.php?pic_id=335294 http://www.thesamba.com/vw/forum/album_page.php?pic_id=335297

[busdaddy]

Correct on both accounts, it went to that bracket on the EGR valve, and you'll have to do some bending on the end with strong pliers to reshape a new hook.

Late models required two throttle return springs to comply with some DOT mandate, it's not a bad idea compared to the experience of a jammed throttle and the excitement that brings.
_________________
Rust NEVER sleeps and stock never goes out of style.

Please don't PM technical questions, ask your problem in public so everyone can play along. If you think it's too stupid post it here
Stop dead photo links! Post your photos to The Samba Gallery!

Слава Україні!

[bug1000000000]

Thanks for the confirmation!