Author |
Message |
flyboy705 Samba Member
Joined: April 10, 2012 Posts: 40 Location: Ontario, Canada
|
Posted: Wed Jan 08, 2020 7:23 pm Post subject: Help please with instrument cluster swap TDI |
|
|
Hi all.
Got my ALH TDI from a 2001 Jetta installed and its running. Yeah. I'm also using the instrument cluster from the same Jetta as well. For several advantages reasons like no tach converter needed, the transmission I'm using has the appropriate VSS, hatch light, CEL etc ...
I got that wired up and its all working fine.
However, I got warning lights and the horn due to the missing signals from airbag and ABS units. I'm using the K-Line and the hi/lo can busses.
Does anyone know how to code the cluster so I don't get the lights anymore ??
How did you make it go away ?
I got VCDS and the login pin |
|
Back to top |
|
|
MarkWard Samba Member
Joined: February 09, 2005 Posts: 17114 Location: Retired South Florida
|
Posted: Thu Jan 09, 2020 4:41 am Post subject: Re: Help please with instrument cluster swap TDI |
|
|
You might have better luck asking at TDIClub.com. They have a thread devoted to conversions. _________________ ☮️ |
|
Back to top |
|
|
16CVs Samba Member
Joined: February 22, 2004 Posts: 4024 Location: Redwood City, California
|
Posted: Fri Sep 24, 2021 9:48 pm Post subject: Re: Help please with instrument cluster swap TDI |
|
|
Helping a buddy with an older TDi swap. Done about 7 years ago and builder did not hook up CEL. Was called into the Ref for a visual inspection (watch out you diesel cheaters) The ref said he needed a CEL, can someone enlighten me where I would go to get that signal? I would guess that there is some unused wire for this purpose.
As Usual Smart Ass answers and WAGS always welcome.
Stacy _________________ 1987 Syncro Westfalia Triple knob (bastard)
1989 Syncro Tristar Triple knob "Swedish"
2013 Jetta Hybrid a true "Zwitter"
Samba member # 14980
Call anytime number 650 722 4914 .
Keep Your van running and upkept tastefully for the love of the hobby.
Don't let your van end up in an "abortions" thread. |
|
Back to top |
|
|
Vanagon Nut Samba Member
Joined: February 08, 2008 Posts: 10370 Location: Sunshine Coast B.C.
|
Posted: Fri Sep 24, 2021 11:12 pm Post subject: Re: Help please with instrument cluster swap TDI |
|
|
16CVs wrote: |
Helping a buddy with an older TDi swap. Done about 7 years ago and builder did not hook up CEL. .... The ref said he needed a CEL, can someone enlighten me where I would go to get that signal? I would guess that there is some unused wire for this purpose. |
Which version engine management? That asked.....
Even up to OBD2, I bet a single wire from ECU provides ground path to light up the CEL. IOW, connect 15 + to CEL bulb and the ECU does the rest.
Neil. _________________ 1981 Westy DIY 15º ABA
1988 West DIY 50º ABA
VE7TBN |
|
Back to top |
|
|
leecat Samba Member
Joined: September 13, 2012 Posts: 773 Location: Regina
|
|
Back to top |
|
|
|