Author |
Message |
rayroc Samba Member
Joined: March 27, 2013 Posts: 249 Location: PA
|
Posted: Fri Apr 27, 2018 4:52 pm Post subject: SO42 walk through rear cushion size |
|
|
anyone know the full width of a rear bed with cabinet from a 67 in mustard vinyl? |
|
Back to top |
|
|
DadaCheese Samba Member
Joined: April 15, 2008 Posts: 837 Location: Richmond, CA
|
Posted: Sat Apr 28, 2018 6:39 am Post subject: Re: rear bed |
|
|
Do you specifically mean the cushion width?
...I can measure mine if that's what you need.
Mine is a '67 walk-through, so the mustard-vinyl covered has the spare tire and the cabinet in the back. _________________ ----------------------------------------------------------
Dada as in dadaism.
Cheese as in the stuff I love to eat. |
|
Back to top |
|
|
DadaCheese Samba Member
Joined: April 15, 2008 Posts: 837 Location: Richmond, CA
|
Posted: Sat Apr 28, 2018 9:39 am Post subject: Re: rear bed |
|
|
Here you go... 39-inches.
Maybe + another quarter to half-inch with the bulge of the cusion within the fabric.
_________________ ----------------------------------------------------------
Dada as in dadaism.
Cheese as in the stuff I love to eat. |
|
Back to top |
|
|
rayroc Samba Member
Joined: March 27, 2013 Posts: 249 Location: PA
|
Posted: Sat Apr 28, 2018 12:34 pm Post subject: Re: rear bed |
|
|
big thanks to the big dadacheese !!!!
appreciate the help!! |
|
Back to top |
|
|
von_hansel Samba Member
Joined: June 12, 2006 Posts: 635 Location: Inland Empire
|
Posted: Fri Oct 15, 2021 4:34 pm Post subject: Re: rear bed |
|
|
Instead of starting a new thread, I figured I would utilize this one.
Has anyone seen a walk thru SO42 rear cushion in a different size other than what DadaCheese posted above of 39x30?
I found a cushion recently that is 36x28. It looks original. Has the same zipper, same stitch pattern, same stitch color, and same seams/ fold over as my original cushion that measures 39x30.
I know its not from an SO69 as I measured a friend's SO69 rear cushion and that cushion was 40x35.5
Thoughts?
You can see the differences in size in this first photo.
I do not see any evidence of it being cut down from a larger cushion. |
|
Back to top |
|
|
von_hansel Samba Member
Joined: June 12, 2006 Posts: 635 Location: Inland Empire
|
Posted: Thu Nov 04, 2021 4:41 pm Post subject: Re: rear bed |
|
|
I looked at two more walk through SO42 rear cushions and found two more different sizes. Both very original buses and both are 1967 model year.
I thought that all SO42 walkthrough cushions were a standard size of 39x30 but after doing some research I have found this is not the case.
After looking at 4 different rear cushions, all 4 are different sizes.
Edit: Here are the sizes we have found:
39.5x30
39x30
39x29
38x30
36.5x28
36x29
Last edited by von_hansel on Fri Nov 05, 2021 11:06 am; edited 1 time in total |
|
Back to top |
|
|
BarryL Samba Member
Joined: November 01, 2004 Posts: 14269 Location: Casa de Oro, California
|
Posted: Thu Nov 04, 2021 6:31 pm Post subject: Re: rear bed |
|
|
Great intel. I'll measure my '67 tomorrow. |
|
Back to top |
|
|
von_hansel Samba Member
Joined: June 12, 2006 Posts: 635 Location: Inland Empire
|
Posted: Fri Nov 05, 2021 6:20 am Post subject: Re: rear bed |
|
|
BarryL wrote: |
I'll measure my '67 tomorrow. |
Awesome! I am looking forward to your findings. |
|
Back to top |
|
|
BarryL Samba Member
Joined: November 01, 2004 Posts: 14269 Location: Casa de Oro, California
|
Posted: Fri Nov 05, 2021 9:56 am Post subject: Re: rear bed |
|
|
I get 39" X 29" outer edge of bead.
From the stitching to stitching I get 38 1/2" X 28 1/2".
From pooch to pooch it is 39 1/2" X 29 1/2" |
|
Back to top |
|
|
von_hansel Samba Member
Joined: June 12, 2006 Posts: 635 Location: Inland Empire
|
Posted: Fri Nov 05, 2021 11:05 am Post subject: Re: rear bed |
|
|
BarryL wrote: |
I get 39" X 29" outer edge of bead. |
Thank you BarryL. This information helps out a lot.
We now know that the rear cushion came in different sizes. |
|
Back to top |
|
|
lator Samba Member
Joined: September 10, 2009 Posts: 10 Location: Milwaukee
|
Posted: Sun Nov 07, 2021 7:19 am Post subject: Re: SO42 walk through rear cushion size |
|
|
Unfortunately, my SO42 didn't come with a rear cushion so I bought a reproduction from NLAVW. For what its worth, it measures 37.5" x 29.75" (stitch-to-stitch).
I would think the that the measurement would be an even metric number. Something like 95cm (37.4") x 75cm (29.5") |
|
Back to top |
|
|
|