Vintage carbs & manifolds info need it

[MAW65]

Hello guys

I found a set of vintages carbs (solex 28 PIC) and manifolds that are supose to fit a 40 HP engine but never seen set like this before so thats why I show them here trying to get some info
Have a good day

[[email protected]]

Those look to be 1300/1500/1600 single port manifolds the angle from your pictures #2 of the manifold gives it away ...place the carburetor straight up top "flat" and look at the angle of the lower part of the manifolds if it's at an angle those are 1300/1500/1600 single port heads/ manifolds ..40hp heads / manifolds bolt on flat not angled ...

[PEPPE]

the height of them suggests that can be a kit for a type 3

[MAW65]

Yes I realized what you said about the angle of the manifolds will not fit the 40HP heads and about the height I was guessing the same there are very short to fit my engine
Anyway if somebody can provide any info about this kit it will be good for the common knowlege